1970 Honda N600 wheel bolt pattern

Ballz · **Posted:** Sun Dec 27, 2009 7:53 pm

Hello,

Does anyone know what the wheel bolt pattern is for the N600?

e-at_me · **Posted:** Sun Dec 27, 2009 8:11 pm

4x110.

john · **Posted:** Sun Dec 27, 2009 9:33 pm

E-AT_me wrote:

4x110.

x2

And they are tough to find wheels for...

Ballz · **Posted:** Mon Dec 28, 2009 1:01 am

Thanks guys!

79cord · **Posted:** Mon Dec 28, 2009 7:17 am

datsunfreak wrote:

E-AT_me wrote:

4x110.

x2

And they are tough to find wheels for...

Shared with pre '75 Toyota Corolla?
First Mazda RX-7 & R100/1000/1300
but they're RWD so offsets a bit far off.

I have to investigate Daihatsu Kei cars which seem to match & FWD so might be better.

john · **Posted:** Mon Dec 28, 2009 2:32 pm

79cord wrote:

Shared with pre '75 Toyota Corolla?
First Mazda RX-7 & R100/1000/1300
but they're RWD so offsets a bit far off.

The biggest problem with most of those are diameter sizes, not offsets (although they won't take a very wide wheel). The Corolla probably has some 12x4 steelies that might work? I'd guess a 13x5 is the smallest thing you can find for an RX7. What came on the R100?

I have 13x5.5 wheels on my N600 and they are HUGE.

vwdmc16 · **Posted:** Mon Dec 28, 2009 3:32 pm

i currently have one 13" rx7 rim with a 205 50 13 toyo tire on the lr side of my z:

this is what i will attempt to use, its the only oldschool rim i have, and they are near free a good cleaning and paint detail it might look ok, maybe with low profile 13"s it will work, i would like to use 10" but there is one one good tire avalible, the A008.

hondawizard · **Posted:** Mon Dec 28, 2009 3:43 pm

Mini Lite will make you a set of wheels to fit the Honda 600 Sedan and coupes, 10x4.5 or 10x5 maybe even wider but space starts to end after a five inch wide wheel. Lots of ATV wheels out there also in this bolt pattern.

john · **Posted:** Mon Dec 28, 2009 6:40 pm

hondawizard wrote:

Lots of ATV wheels out there also in this bolt pattern.

I have some 12x7, -64 offset ATV wheels if anyone wants them.

vwdmc16 wrote:

i currently have one 13" rx7 rim with a 205 50 13 toyo tire on the lr side of my z... this is what i will attempt to use, its the only oldschool rim i have, and they are near free a good cleaning and paint detail it might look ok, maybe with low profile 13"s it will work, i would like to use 10" but there is one one good tire avalible, the A008.

I have a 175/50-13 on mine, also only one brand available, though...

Still needs flares put on...

If anyone needs them, I have some 13x5 Libres that will fit. :wink:

e-at_me · **Posted:** Tue Dec 29, 2009 3:52 am

libres are SICK.. what i'd like to know is what are mini coopers bolt patterns? because that is where you find 10 inch tires.. and SSR makes a mini-specific wheel that i am pretty darn sure will work with the n/z's.

hondawizard · **Posted:** Tue Dec 29, 2009 4:53 am

classic minis use a 4x100 pattern I think, I have bought adapters and used mini wheels on my N600, buy tires from tire rack, yokohama a008 right now are the only tire they have, mini mania has other tires but are more expensive than the A008s.

Ballz · **Posted:** Tue Dec 29, 2009 12:35 pm

I'm also looking into ATV wheels... I don't think I want 13's, they look kinda funny on the car..

john · **Posted:** Tue Dec 29, 2009 6:42 pm

Most of the ATV's have killer offsets, though. Like I said, the set I have is -64... :shock:

I think I recall seeing some front wheels in 12x6 on some Honda ATVs with a decent offset (+25 or so). They also use the same tiny wheel studs as the N600. :tu:

RetroMat · **Posted:** Wed Dec 30, 2009 5:34 pm

hondawizard wrote:

classic minis use a 4x100 pattern I think, I have bought adapters and used mini wheels on my N600, buy tires from tire rack, yokohama a008 right now are the only tire they have, mini mania has other tires but are more expensive than the A008s.

minis are 4x4" so 101.6mm, its only those fat German minis that are 4x100 :lol:

1970 Honda N600 wheel bolt pattern

Who is online