72 kgc10 GT-X work in progress

2000gtx · **Posted:** Tue Sep 08, 2009 11:36 am

the air temp sensor needs to go before butterflies on air cleaner side the brake booster hose you will need to make a tube that connects all the itbs together or you will get wacky brake booster and map sensor readings...

2000gtx · **Posted:** Wed Sep 09, 2009 7:18 am

i hear ya i turned mine off with my set up...but having that will make start up cleaner ....yea i am using a vacuum log also for the brake booster,the radiator i had custom built....cool sounds like you are getting close

princesnicole · **Posted:** Wed Sep 16, 2009 7:11 am

Well I got the computer arrangement all in abode pics anon to follow. Problems I encountered: The baptize acting sensor does not fit the stocl location. Irritating because this is a L28 specific kit. Going to fix this by adjustment a bumg into a section of aqueduct and installing it into the radiator hose.

_________________
Aprilaire

DeRuX · **Posted:** Thu Sep 17, 2009 1:33 pm

Glad to hear you got the wiring done. It is a huge step when thing start to work again.

BigWillieStyles · **Posted:** Sat Sep 19, 2009 5:59 am

Any pics of the entire car?

2000gtx · **Posted:** Sat Sep 19, 2009 10:04 am

i am sure will be plenty of pics after the 3rd of oct.....(jccs)

kev · **Posted:** Fri Sep 25, 2009 3:20 pm

Wow...looks sweet

DeRuX · **Posted:** Sat Sep 26, 2009 11:11 pm

damn this is a little set back but you will pull thru. It will be a mad dash to get it ready.

DeRuX · **Posted:** Tue Sep 29, 2009 10:23 am

I can help push it there if we have to. I have built plenty of cars all night the day before a car show. I was tired at the show but my car was there.

2000gtx · **Posted:** Thu Oct 01, 2009 2:43 pm

looks like your rockin the dr30......

kev · **Posted:** Fri Oct 02, 2009 3:41 pm

Shame to hear she's not going to make it

FWIW, there was a cooling passage break in one of my ports too and that was repaired with Devcon by the cylinder head guys. Pressure tested fine.

kev · **Posted:** Sat Oct 03, 2009 12:50 am

Devcon sets so hard that you can port it again, just like metal, AFAIK.

airforce1 · **Posted:** Thu Oct 29, 2009 2:12 am

green, this has been a fascinating thread. Thinking about getting a GTX myself.

Garant · **Posted:** Sat Nov 28, 2009 7:24 pm

this your hako?

Garant · **Posted:** Sun Nov 29, 2009 8:01 am

notajncr wrote:

WOW!! Are you a stalker? I do not have that pic. That looks to be from the first day I bought the car. I got it home and immediately switched out the mesh rims for my watanabes I had in storage. Later I had to find the WORKS overfenders to keep the cops from giving me tickets for the tires extending past the GTR sized fender flares. Nice addition to the post. Thanks. I am hoping weather clears up tomorrow so I can get some more wrenching done on the ride.

yes in fact if you look outside your window you might be able to see me sitting in palm tree across the street :wink:

actually, i stumbled onto an old website for the oki (historic club?). interesting stuff, but site looks to have been abandoned or forgotten, but somehow never deleted

Garant · **Posted:** Sun Nov 29, 2009 11:45 am

the historic club still lives ... stateside :wink:

a few guys still living in oki of course

JDMPalace · **Posted:** Sun Nov 29, 2009 1:43 pm

notajncr wrote:

Rear bushings.

Where do you order your bushings from ?? Thnaks Sean

kev · **Posted:** Sun Nov 29, 2009 4:05 pm

They look the same as 510 bushings, right?

skyrine · **Posted:** Sun Nov 29, 2009 6:24 pm

i would love it if they were the same

kev · **Posted:** Sun Nov 29, 2009 7:31 pm

skyrine wrote:

i would love it if they were the same

If not, then I'd bet they'd be the same as kenmeri Skyline and www.datsport.com would stock bushes for them, and be able to ship internationally.

72 kgc10 GT-X work in progress

Who is online