Te37 Cusco strut bar

hotdoghogie · **Posted:** Thu Aug 06, 2009 1:27 am

anybody know wher i can get one? i cant seem to find any Te37 parts from cusco.

cman · **Posted:** Fri Aug 14, 2009 3:22 am

hotdoghogie wrote:

anybody know wher i can get one? i cant seem to find any Te37 parts from cusco.

I think you can barely find ANY parts for TE37 - anywhere

This model is getting really rare.

bullitt · **Posted:** Sat Aug 15, 2009 5:09 am

hotdoghogie wrote:

anybody know wher i can get one? i cant seem to find any Te37 parts from cusco.

You can use Strut bar from Mitsubishi Ertena..picture below...i'm not sure if this car got in your place or not...In my country Malaysia..most of #E3# Corolla guys including me use that for our ride..its same bolt patern and width..hth

hotdoghogie · **Posted:** Sat Aug 15, 2009 11:26 pm

nope nvere had those car in the us... by the looks of it im glad we didnt lol. I found a place selling Cusco te37 strut bars. Im pretty sure it will fit my te31 but i could be wrong.

migz808 · **Posted:** Sun Aug 16, 2009 10:30 am

Prettty sure you have the same tophat bolt pattern as the older Celicas, KE2x, TE2x, and even the KP61. The strut bars for these older Corollas and KP are still available from Cusco and T3. The only thing to find out if the distance between the two tophat mountings are of equal distances with those of the older Corollas or the KP.

silverra23 · **Posted:** Sun Aug 16, 2009 6:24 pm

I run one on my club racer.

I sourced it from www.ajps.com.au

I imagine he could get it shipped in for you if you like.

silverra23 · **Posted:** Sun Aug 16, 2009 6:58 pm

Just a follow up note:

Strut tops (pillow ball mounts) for a TE37 are Cusco Part Number 109410A

Strut brace for a TE37 are 140510A

I sourced these numbers by going to the Cusco Japan website and doing a search on TE37

I would guess that any Cusco dealer should be able to get them in using those part numbers.

roosterfella46 · **Posted:** Mon Aug 17, 2009 6:10 am

will the te37 strutbar fit ke30??
i got a pal that made a custom replica of the TRD strutbars for his KE30 n KE70...
he offered me $50 for a new trd repica strutbar...is it too much?
what u guys think?

silverra23 · **Posted:** Mon Aug 17, 2009 6:36 am

It would fit KE30, KE35, KE38, KE55 and TE variants of the same designation.

Your friends one sounds cheap, do it!

Cusco one is about AUS$250 I think. If anyone in Australia wants one let me know as I can get you free freight.

Te37 Cusco strut bar

Who is online