#
It is currently Thu Dec 18, 2014 3:38 pm


Post a new topicPost a reply Page 1 of 1   [ 14 posts ]
Author Message
 Post subject: New Guy, PacNW. Spokane, WA (supra, stout, celica, 4x4)
PostPosted: Sun May 19, 2013 8:24 pm 

Joined: Sun May 19, 2013 8:10 pm
Posts: 7
Just picked this up a week or so back, 845 bucks. Clean title, no motor, trans was there.
Swapped rebuilt 20r and w56 2wd truck tranny into it (took them out of my 67 stout)
1975 Celica GT. 99% rust free (couple small spots of surface here and there). Body is damn straight but the passenger front fender which will be worked out. Flares, satin pearl white, and a proper color change paintjob coming soon.

Got a cheap but beat up smiley...straightening it out/fiberglass, and painting it.
Custom made chin spoiler. And will be building a duckbill for the trunklid.

Have a set of 15x8 0et eagle 028s with meaty 235s on them that are going on it. Getting coilovers asap to get the front down.
Plans are simple 20r, sidedrafts, cam, header...and maybe a little nitrous. Might do a 20/22r hybrid later, but gotta finish the Supra and 22rz 4x4 first.

Here are some pics of the celica.
When I got it...
http://i78.photobucket.com/albums/j101/ ... 56ef2f.jpg
http://i78.photobucket.com/albums/j101/ ... af25ae.jpg

Engine swapping
http://i78.photobucket.com/albums/j101/ ... 6c8a4b.jpg
http://i78.photobucket.com/albums/j101/ ... 491afa.jpg

Smiley/homemade chin spoiler mockup (all roughed in, will get body/finish work before paint).
http://i78.photobucket.com/albums/j101/ ... de4586.jpg

Here are my other "Toys"
86 4x4 on 35x13.5s. 22r with weber and header, soon to be supercharged with edelbrock 500 4barrel. Geared 5.29.
http://i78.photobucket.com/albums/j101/ ... 6f39f9.jpg
Pullin a tundra out.
http://i78.photobucket.com/albums/j101/ ... 2795dc.jpg

The '67 Stout (will be getting crown vic front suspension and either 1uz/5vz swapped)
http://i78.photobucket.com/albums/j101/ ... 41ug-1.jpg
http://i78.photobucket.com/albums/j101/ ... geyg-1.jpg

The 85 Supra, was 5mgte, but now Holset powered 2jz being build for it.
http://i78.photobucket.com/albums/j101/ ... 000279.jpg
http://i78.photobucket.com/albums/j101/ ... 000939.jpg
http://i78.photobucket.com/albums/j101/ ... 3426-2.jpg
http://i78.photobucket.com/albums/j101/ ... bhnbvv.jpg
http://i78.photobucket.com/albums/j101/ ... be1gwv.jpg

Previous supras...
210whp high comp 6m in this 82.(sold)
http://i78.photobucket.com/albums/j101/ ... 010623.jpg

Stocker, first car, created the toyota monster I am today.(wrecked and parted)
http://i78.photobucket.com/albums/j101/ ... G_0413.jpg

Old 2wd yota(sold)
http://i78.photobucket.com/albums/j101/ ... CF2800.jpg

So yeah..thats pretty much my "toys".
Im a 22(almost 23) year old Senior Certified Lexus Technician. Vintage toyotas are my passion/hobby.


Stripped the interior out and bought 10 yards x 56" wide black leather and am in the process of recovering everything. Black carpet and black racing seats go in this weekend.
before::
http://i78.photobucket.com/albums/j101/ ... 71612c.jpg
after::
http://i78.photobucket.com/albums/j101/ ... 36f6e4.jpg

ZG flares are ordered and when they get here bodywork/prep starts and paint shortly after.

Gets 15x8 eagle 028s wrapped in good size rubber that are coming off my 85 supra.
http://i78.photobucket.com/albums/j101/ ... ce71b3.jpg
http://i78.photobucket.com/albums/j101/ ... 8e56bf.jpg

Got my hedman, coated, wrapped.
Got the dual DHLA 40s (dellorto).
http://i78.photobucket.com/albums/j101/ ... 2428f5.jpg
http://i78.photobucket.com/albums/j101/ ... 378db0.jpg
http://i78.photobucket.com/albums/j101/ ... fe8deb.jpg

Been crazy busy...gettin some work done on the celica tho.
Got big vented cressida brakes/spindles to mount the coilovers to, got the coilovers welded up, ordered camber plates...
rear shock hole just needs to be redrilled on the shock and the backs are ready...so If the camber plates get in this week...it'll go in this weekend.

ZG flares came in, got the dash bezel wood grain finished up. Headliner is done in suede, dash to be recovered soon.
Racing seat brackets made. Should be getting carpet this week to lay down.

Dash
http://i78.photobucket.com/albums/j101/ ... c31653.jpg

Coilovers...
http://i78.photobucket.com/albums/j101/ ... a24cd9.jpg
http://i78.photobucket.com/albums/j101/ ... 304e4f.jpg
http://i78.photobucket.com/albums/j101/ ... 7247a4.jpg
http://i78.photobucket.com/albums/j101/ ... e95521.jpg

http://i78.photobucket.com/albums/j101/ ... f9b76f.jpg

Headliner....
http://i78.photobucket.com/albums/j101/ ... f7573b.jpg


Rebuilt the carbs....
http://i78.photobucket.com/albums/j101/ ... 584b71.jpg

Wheels...15x7 0et 235/50/15s all around, half inch spacers in the rear. ZG flares, fender trimming and low will be coming soon.
http://i78.photobucket.com/albums/j101/ ... 0a978c.jpg

Cant wait to get the suspension and flares on and start driving it.


Top
 Profile  
 
 Post subject: Re: New Guy, PacNW. Spokane, WA (supra, stout, celica, 4x4)
PostPosted: Sun May 19, 2013 8:33 pm 

Joined: Sun May 19, 2013 8:10 pm
Posts: 7
Woulda posted images but wasnt about to resize every single one. Sorry you get the links.


Top
 Profile  
 
 Post subject: Re: New Guy, PacNW. Spokane, WA (supra, stout, celica, 4x4)
PostPosted: Sun May 19, 2013 8:34 pm 

Joined: Tue Aug 21, 2012 9:20 pm
Posts: 10
Awesome stuff. Tell me more about your high comp 6m. I've got a high comp M series as well.


Top
 Profile  
 
 Post subject: Re: New Guy, PacNW. Spokane, WA (supra, stout, celica, 4x4)
PostPosted: Sun May 19, 2013 8:39 pm 

Joined: Sun May 19, 2013 8:10 pm
Posts: 7
slightly shaved block and head with the later style high comp 5m pistons in the jdm 6m block..car ran balls out, dynoed 210 tq at the wheels.


Top
 Profile  
 
 Post subject: Re: New Guy, PacNW. Spokane, WA (supra, stout, celica, 4x4)
PostPosted: Sun May 19, 2013 8:41 pm 

Joined: Tue Aug 21, 2012 9:20 pm
Posts: 10
Any idea's about the compression ratio? I've got a low comp 5m bottom end with a 7m head. Basically a 24v 2.8 M series


Top
 Profile  
 
 Post subject: Re: New Guy, PacNW. Spokane, WA (supra, stout, celica, 4x4)
PostPosted: Sun May 19, 2013 8:42 pm 

Joined: Sun May 19, 2013 8:10 pm
Posts: 7
No..people have said that the later high comp 5m pistons in the jdm 6m block yield roughly 10:1...with the slight shaving maybe just a bit more...


Top
 Profile  
 
 Post subject: Re: New Guy, PacNW. Spokane, WA (supra, stout, celica, 4x4)
PostPosted: Sun May 19, 2013 8:46 pm 

Joined: Tue Aug 21, 2012 9:20 pm
Posts: 10
What fuel managment?


Top
 Profile  
 
 Post subject: Re: New Guy, PacNW. Spokane, WA (supra, stout, celica, 4x4)
PostPosted: Sun May 19, 2013 9:08 pm 

Joined: Mon Jul 26, 2010 9:38 am
Posts: 378
Location: Beaverton, OR
A toyota family! I approve lol. I have two celicas and a scion. I want a stout so bad but never able to buy one. Look up "Spokane Toyota Owners Club" on facebook. I think they had a meet today but i'm not sure.


Last edited by yella81celica on Mon May 20, 2013 7:24 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: New Guy, PacNW. Spokane, WA (supra, stout, celica, 4x4)
PostPosted: Sun May 19, 2013 9:27 pm 

Joined: Sun May 19, 2013 8:10 pm
Posts: 7
Me86Rob wrote:
What fuel managment?


stock fuel managment (82 with vacuum dizy), with the plug in the afm drilled out to use the air bypass screw for tuning with an adjustable fuel pressure regulator tuned on the dyno's wideband


Top
 Profile  
 
 Post subject: Re: New Guy, PacNW. Spokane, WA (supra, stout, celica, 4x4)
PostPosted: Sun May 19, 2013 11:56 pm 

Joined: Tue Aug 21, 2012 9:20 pm
Posts: 10
Thats fantastic news! I'm running later mx73 fuel management, and people on the celica supra forums were telling me id never make more than 195. We've not done a super accurate calculation, but it should come out to somewhere around 13:1. I've got a 40 over bottom end to put in it when I get the last few parts together. Had to take some of the parts for my 5 speed mx73 haha. You ever hear of anybody else using a 5m bottom end and 7m head?


Top
 Profile  
 
 Post subject: Re: New Guy, PacNW. Spokane, WA (supra, stout, celica, 4x4)
PostPosted: Mon May 20, 2013 3:22 pm 
User avatar

Joined: Sun Aug 09, 2009 1:53 am
Posts: 302
Location: Spokane, WA
Welcome to JNC! Nice to see another in Spokane. We have quite a few die hard Toyota guys up here. Hit me up if you ever want to hang out. The Toyota Guys up here have a meeting every month, would love to see you come out.

Aaron


Top
 Profile  
 
 Post subject: Re: New Guy, PacNW. Spokane, WA (supra, stout, celica, 4x4)
PostPosted: Tue May 28, 2013 4:14 pm 

Joined: Sun May 19, 2013 8:10 pm
Posts: 7
Image
Valve cover complete.


Top
 Profile  
 
 Post subject: Re: New Guy, PacNW. Spokane, WA (supra, stout, celica, 4x4)
PostPosted: Wed May 29, 2013 12:29 am 

Joined: Thu Dec 23, 2010 6:10 am
Posts: 119
Location: Washington State
Its like I have seen this car before..... :mrgreen:


Top
 Profile  
 
 Post subject: Re: New Guy, PacNW. Spokane, WA (supra, stout, celica, 4x4)
PostPosted: Wed May 29, 2013 2:19 pm 

Joined: Sat May 12, 2012 9:19 am
Posts: 7
Location: Santa Cruz, CA
Some day I'll have a stout. So cool.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 1 of 1   [ 14 posts ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
610nm Style by Daniel St. Jules of Gamexe.net