hayashi streets info please

jdm10a · **Posted:** Sat Feb 16, 2013 5:22 pm

Hi Guys was wondering if anyone can tell me if the hayashi streets are available in 5 lug 110 pcd?
Are there any suppliers in Australia done a bit of a search but havnt been able to find any info.
Cheers Mick

gypsy · **Posted:** Sun Feb 17, 2013 3:18 am

Try Ottomotto in Nth Parramatta Mick for a used set, you might get lucky.

Failing that Yahoo Auctions is your friend, you should be able to find a used set pretty easy. Don't pay too much for them, a polish, repaint, shipping can easily make it not worthwhile especially if you are having someone else clean and paint them. They will probably need new steel lug inserts, no biggy.

I can't remember the exact figure I paid for my Wats, think they owe me 700 landed, most of the cost was in the shipping... generally speaking used wheels can be found pretty cheap. Upgarage is also worth a look, there are a couple of other places in Japan but can't remember them. Those are the main ones anyhow.

jdm10a · **Posted:** Sun Feb 17, 2013 5:29 pm

John the biggest problem is I've been looking for ages and can't find the right pcd the wagon is 5x110 pcd I don't know of any other Japanese car with this lug pattern and then off set is another thing. Any ideas of other Japanese cars that run this pattern

mazdajon · **Posted:** Sun Feb 17, 2013 7:27 pm

jdm10a wrote:

John the biggest problem is I've been looking for ages and can't find the right pcd the wagon is 5x110 pcd I don't know of any other Japanese car with this lug pattern and then off set is another thing. Any ideas of other Japanese cars that run this pattern

If you are looking for mags to suit Mazda 800/1000 5 stud it is the same as early Holden Torana and HK/T/G stud pattern.

I had a set of wheels drilled to suit my 1000 wagon. As long as 13 inch or bigger diametre then you will clear the front wishbones.

jdm10a · **Posted:** Sun Feb 17, 2013 8:25 pm

Great info thanks for the heads up Jon.

jace · **Posted:** Mon Feb 18, 2013 4:49 am

you can buy Hayashi Streets new from Japan, Jesse Streeter, RupeWrecht, importmonster, otomoto etc can bring them in for you.
http://www.hayashiracingusa.com/product ... ypest.html

i think your chances of finding a used set in good sizes in 5x110 are about ∞:1

but anyway you'd need to request custom PCD and they're are expensive already. I hope you have deep pockets.

jdm10a · **Posted:** Mon Feb 18, 2013 12:38 pm

I did find the hayashi USA site I have sent a email requesting price on the custom pcd but no response, has anyone felt with them? Is there response time usually slow or has my email been lost in the cyber space

jace · **Posted:** Tue Feb 19, 2013 2:46 am

Contact Streeter or Rupewrecht, they can contact Hayashi Japan for you.

or try calling the distributor for Hayashi in the states (5zigen)

RdS · **Posted:** Tue Feb 19, 2013 12:54 pm

jdm10a wrote:

I did find the hayashi USA site I have sent a email requesting price on the custom pcd but no response, has anyone felt with them? Is there response time usually slow or has my email been lost in the cyber space

I sent Hayashi USA an email a month or two ago, but I also never got a reply.
I want to give them my money.. but no joy. That's how you run a business...

mazdajon · **Posted:** Wed Feb 20, 2013 2:52 am

Here is a pic of my 1000 wagon fitted with 13 x 6 minlite style wheels. Same stud pattern as earlier 800.

jdm10a · **Posted:** Wed Feb 20, 2013 12:28 pm

That is just beautiful Jon.

jace · **Posted:** Sun Feb 24, 2013 12:47 am

there's a disproportionate number of awesome cars in qld.

mazdajon · **Posted:** Wed Feb 27, 2013 8:06 pm

jdm10a wrote:

That is just beautiful Jon.

Apart from the bonnet having been repainted (before I got it) the rest of the body is totally rust free and original. It is still painted green under the guards. The seats have been retrimmed as well, but the door trims are like new and the sun visors still have plastic on them. Even the rubber floor mats front and rear are fully intact.

This car is like it has been in a time warp for 46 years. I was very lucky to have been offered it over 10 years ago when my good friend Paul Davies found it in Gladstone, Qld. That was his payback for me letting him buy his now amazing 808 coupe off me (I owned it before he made it perfect!) several years earlier.

I must do a post of the 1000 in the Mazda section, I think? :wink:

timmy201 · **Posted:** Mon Mar 11, 2013 12:49 am

I can't find any hayashis... Saabs and vectra/Astra have the same pcd

But SSR Mesh
https://www.importmonster.com.au/view?u ... 2%20PCD110

These are pretty cool too
https://www.importmonster.com.au/view?u ... e=14%20110

BBS copy
http://www.ebay.co.uk/itm/15-OPEL-ASTRA ... 5d353c7564

ewokracing · **Posted:** Sun Mar 17, 2013 3:17 pm

Do they come in 5 hole patterns at all? like 5x114.3? I'm trying to find some in a 5x114.3 or 5x120.5 (5x4.75) in a +33ish offset in 15x6

timmy201 · **Posted:** Sun Mar 17, 2013 9:17 pm

You can get fake ones in 5x114.3. Pretty wide specs though!

http://www.rotawheels.com/wheel.php?id=107

Also Te37V copies...

http://www.rotawheels.com/wheel.php?id=34

ewokracing · **Posted:** Mon Mar 18, 2013 3:24 pm

bummer, I was hoping to find a 15x6 wheel in a +30ish offset, still need something 70's looking in a 5 stud pattern for the rover.

Does anyone cut and re weld the centres from Aluminium wheels in Melbourne?

timmy201 · **Posted:** Mon Mar 18, 2013 7:12 pm

Hmmm

BMW Wheels?
http://www.ebay.com.au/itm/BMW-E36-E46- ... _500wt_899

Old commo..
http://www.ebay.com.au/itm/SLE-Factory- ... _500wt_899

ewokracing · **Posted:** Mon Mar 18, 2013 9:46 pm

Actually, was thinking of something like this:

https://www.importmonster.com.au/view?u ... tle=15%204

de-chromed and sprayed black with new outers (either made here in Melbourne or found somewhere) with a metal centre spinner, so that it comes out looking a bit like this:

http://www.britishracecar.com/SydSilver ... uar-DG.jpg

pity though, those Hayashi/Rotas look great and the original Campagnolo wheels are way beyond my price range

timmy201 · **Posted:** Wed Mar 20, 2013 4:37 pm

Well then...

Go to http://www.wheelvintiques.com/index.php/

and have a good look around. Ive bookmarked this page for when I build a 40's truck... the "Hotrod Artillery" wheel even comes in 5x5" PCD, and you can get awesome accessories like:

http://www.wheelvintiques.com/index.php ... inner.html

They have a selection on ebay Australia through this seller:
http://stores.ebay.com.au/Street-AutoPa ... =147358973

Oh, and by browsing your Rover thread, I see you got married recently. Hope yours went great...mine was 2nd of Feb :tu:

hayashi streets info please

Who is online