Hey guys,
Got a n360 and id like to get abit more power out of my stock engine.
I though about a motorcycle engine swap but it looks like a ton of work, so i was just wounding whats some good ways to get about more power out of my engine that doesn't involve something with a ton of work

Thanks ben

Don't think there is much more power to be had really since the N360 was considered indecently fast for its category when released in Japan. Though there were heads ported for twin carburetors in Japan, there was only one intake port on most engines.
Anything is possible with enough determination though, some Japanese importing 600cc engines from the US and modifying these & twin-cam 4-valve-per-cylinder heads from a motorcycle to until they fit each other.
Obviously there is always forced induction via Turbo or Supercharger that would also generate more heat requiring intake-cooling & additional oil cooling for the engine but with such rare engines fixing them if anything went wrong could be very difficult.

_________________
www.cardomain.com/id/79cord
'79 Accord, '89 CR-X SiR, '81 Prelude, '74 Z360 H/T, '71 Z360, '64 S600, '75 Lancia Beta.

Id be pretty keen to dual carb mine and maybe do a dohc conversion but is there information on doing the dohc conversion??

This is all the info I ever found, some of the links failed last time i tried

viewtopic.php?f=3&t=7895

_________________
1972 Honda Z600
1981 Delorean DMC12
1989 Toy Corolla Alltrac

Yea ive read though that, problem is the links are dead so i cant assess the content, what did you search to find those pages when they were up