Planning on running some 15x10s on the rear of the wagon, I've been looking at flares and ZG flares look like they'll do the trick, anyone done up some flares on their colts/galants? I'd like some input, but I know this forum is pretty quiet, so please, speak the hell up.

Thinking about picking a set of these up
http://www.thezstore.com/page/TZS/PROD/7BSA02/50-1562

_________________
"This is where mechanical excellence and one-thousand, four-hundred horsepower pays off."
76 Colt sedan, 73 Colt Wagon, 92 Galant VR4, 77 XS400

Are you going "half on the door, half on the quarter panel" flare, or permanently disabling the rear door? Seems like doing it right will require lots of cutting and welding. Big job...

But would be cool if done correctly.

Here's one that has the rear fender lips cut out, and the flare cut in half.

And these will fit better than the ZG flares, and are cheaper.

viewtopic.php?f=18&t=17378&p=150673#p150673

I am indeed going half on the door, cutting and welding is my specialty, so no worries there. I was actually looking at a couple sets on ebay today, sending you a PM now.

_________________
"This is where mechanical excellence and one-thousand, four-hundred horsepower pays off."
76 Colt sedan, 73 Colt Wagon, 92 Galant VR4, 77 XS400

Funny, this is the picture that made me start looking for ZG flares! haha.

_________________
"This is where mechanical excellence and one-thousand, four-hundred horsepower pays off."
76 Colt sedan, 73 Colt Wagon, 92 Galant VR4, 77 XS400

Guess I'll update this thread on how well those fit

Now... to find some 4x114 15x10 steel wheels....

any suggestions?

_________________
"This is where mechanical excellence and one-thousand, four-hundred horsepower pays off."
76 Colt sedan, 73 Colt Wagon, 92 Galant VR4, 77 XS400

problem solved:
http://www.diamondracingwheels.com/

_________________
"This is where mechanical excellence and one-thousand, four-hundred horsepower pays off."
76 Colt sedan, 73 Colt Wagon, 92 Galant VR4, 77 XS400

A few...

http://www.diamondracingwheels.com/drwcustom.html

http://www.summitracing.com/parts/WVI-10-5004042K/

http://www.summitracing.com/parts/WVI-12-5004042/

So... Now that you have your flares, are you gonna show us how they look on the car?

soon, ive been screwing with the engine end of things

but i've test fit the flares and it looks like it will work out nicely.

_________________
"This is where mechanical excellence and one-thousand, four-hundred horsepower pays off."
76 Colt sedan, 73 Colt Wagon, 92 Galant VR4, 77 XS400

.

Can't wait.

x2 on that
I'd be dead keen to see how they look on your wagon as well.

_________________
If you are into early Mitsu products, have a look at http://www.sigma-galant.com/index.php