#
It is currently Wed Aug 20, 2014 5:26 pm


Post a new topicPost a reply Page 1 of 2   [ 38 posts ]
Go to page 1, 2  Next
Author Message
 Post subject: Hi there EX lancer and L300 van
PostPosted: Fri Sep 02, 2011 2:16 pm 

Joined: Thu Jun 12, 2008 12:38 am
Posts: 28
Hi I have been a lurker here for a while, thought id put up some show off pics :P and introduce myself.

First up my project EX lancer with 2.3l twincam 4G63T, forged cammed and stroked with big garrett hybid turbo
Image
Not my wheels

Pic on my wheels
Image

A pic of when it was going last time 2L 4G63T Biggish turbo 560cc injectors 240kw atw
Image

My L300
Image

Will post up more dets later if anyones interested, gotta go to work now!

OK back from work, The ex lancer is also getting a 5 link setup copied from AE86/DX corolla one of ym good friends is very handy in solid works and has drawn it all up and made a model of it moving ect

Image
Image
Image
Image
Image
Image
Image

There you can see some of the modelling and some of the stuff we have done to the car, all using factory mount points except for the turrets of course which will have some spax coilovers in them mounted to the top of the diff. The diff is currently at the engineers getting shortened and the mounts welded on, its a L200 LSD diff the axles are nice and big so should be great!

There is still a long way to go the motor is mounted but i need new piping for the intercooler, run a new fuel line, brake lines for the rear, handbrake cables, rewire it and the list goes on........

But that didnt stop me purchasing another one the same, not sure what the plans are but will probably tidy it up and daily drive it with a view to building a twin cam 4G63 NA screamer.

Image


Does anyone have any idea where i coul get some of the weather strips that run along the wondow on the outside?

Image


Last edited by macabre on Fri Sep 02, 2011 4:31 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Hi there
PostPosted: Fri Sep 02, 2011 2:59 pm 
Mild Cam
User avatar

Joined: Wed Feb 10, 2010 2:31 pm
Posts: 1677
Location: Cleveland, Ohio
Both of those are GORGEOUS. Welcome to JNC. Can you do me a favor and just stick that L300 in a container and send it to me? :mrgreen:

_________________
-Cam
1980 Datsun 510
1980 Toyota Celica
1984 Porsche 911
1988 Mazda RX7
Image


Top
 Profile  
 
 Post subject: Re: Hi there
PostPosted: Fri Sep 02, 2011 3:04 pm 
User avatar

Joined: Wed Jun 15, 2011 4:46 pm
Posts: 45
Location: Los Angeles - Orange County
Nice looking rides, I bet that Lancer is fun to drive around in. Anyway welcome to the boards.

_________________
Image


Top
 Profile  
 
 Post subject: Re: Hi there EX lancer and L300 van
PostPosted: Sun Sep 04, 2011 9:20 am 

Joined: Sun Aug 21, 2011 10:23 am
Posts: 8
Drooooooooool :shock:

Can you post feedback after you're done with the 5 link conversion? I'd like to know if it helps a lot with traction and if it's worth it. :D

Does the stock rear geometry suck?


Top
 Profile  
 
 Post subject: Re: Hi there EX lancer and L300 van
PostPosted: Mon Sep 05, 2011 1:26 pm 

Joined: Thu Jun 12, 2008 12:38 am
Posts: 28
Jhaqastar wrote:
Drooooooooool :shock:

Can you post feedback after you're done with the 5 link conversion? I'd like to know if it helps a lot with traction and if it's worth it. :D

Does the stock rear geometry suck?

The geometry does its job at stock height, but to go low and have good travel and handle well is impossible, this way ill be able to set it up for drags and track ect easily just by changing a few small things


Top
 Profile  
 
 Post subject: Re: Hi there EX lancer and L300 van
PostPosted: Tue Sep 06, 2011 8:07 am 

Joined: Thu Jun 30, 2011 8:19 am
Posts: 5
Location: SF/Bay
macabre wrote:
My L300
Image

Will post up more dets later if anyones interested, gotta go to work now!

[/img]


Dayam, I saw this picture somewhere online. Pretty nice stance. What's the specs on those wheels. Your L300 was what inspired me to search for a L300 (Mitsubishi Van) here in the U.S.


Top
 Profile  
 
 Post subject: Re: Hi there EX lancer and L300 van
PostPosted: Tue Sep 06, 2011 12:47 pm 

Joined: Thu Jun 12, 2008 12:38 am
Posts: 28
I think in that pic i had 14x8 all round 0 offset, later i put 14x9 on the rear not sure what offset they were. They poked out a bit in front but i never got round to getting the centers moved.


Top
 Profile  
 
 Post subject: Re: Hi there EX lancer and L300 van
PostPosted: Sat Sep 10, 2011 2:00 am 

Joined: Thu Jun 12, 2008 12:38 am
Posts: 28
Image

It rolls on its own 4 wheels now for the first time in ages! Gonna need to raise the tunnel up a bit and notch the chassis to keep it driveable at that height, but the diff worked perfectly! The arms are all straight and fitted in great.

The wheels are 16x8 and 16x7.5, i am gonna look at getting some 10s for the rear to fill the guards out


Top
 Profile  
 
 Post subject: Re: Hi there EX lancer and L300 van
PostPosted: Sat Sep 10, 2011 12:53 pm 
User avatar

Joined: Thu Oct 15, 2009 6:08 am
Posts: 46
Location: Croatia
are these wheels from starion turbo?

_________________
5 speed ,4 cylinders ,3 diamons ,2 liters, 1 turbo, 0 losses


Top
 Profile  
 
 Post subject: Re: Hi there EX lancer and L300 van
PostPosted: Sun Sep 11, 2011 4:02 am 

Joined: Thu Jun 12, 2008 12:38 am
Posts: 28
SSR reverse mesh


Top
 Profile  
 
 Post subject: Re: Hi there EX lancer and L300 van
PostPosted: Thu Oct 06, 2011 4:59 am 
User avatar

Joined: Tue May 17, 2011 7:54 am
Posts: 27
Location: Las Pinas City, Philippines
cool ride chief!

_________________
A174A Mitsu Lancer GT 5 speed new toy
ke25 SOLD
South Park Autoville inc.
South Stream Commercial Development Inc.
Juiced
autocherry


Top
 Profile  
 
 Post subject: Re: Hi there EX lancer and L300 van
PostPosted: Sun Oct 09, 2011 5:41 am 

Joined: Tue Jun 21, 2011 10:55 pm
Posts: 18
Did you make the cut out on the flooring for the diff?

Dropped my A173 and my rear diff is actually hitting the flooring of the car now. Need to Re-tub that section.

Is that the exact area that I need to modify for additional clearance for the Stock Diff?

Thanks! Cool Ride! :tu:


Top
 Profile  
 
 Post subject: Re: Hi there EX lancer and L300 van
PostPosted: Fri Oct 14, 2011 5:29 am 

Joined: Thu Jul 16, 2009 4:08 pm
Posts: 19
Location: Germany
Fanatstic ride you have built, wish I had such talents. Van looks vey cool as well :tu:

_________________
Image
Lancer 2000 Turbo LHD (Germany), Lancer 2000 Turbo RHD (UK)


Top
 Profile  
 
 Post subject: Re: Hi there EX lancer and L300 van
PostPosted: Sun Oct 16, 2011 11:01 pm 

Joined: Thu Jun 12, 2008 12:38 am
Posts: 28
erikbrabus wrote:
Did you make the cut out on the flooring for the diff?

Dropped my A173 and my rear diff is actually hitting the flooring of the car now. Need to Re-tub that section.

Is that the exact area that I need to modify for additional clearance for the Stock Diff?

Thanks! Cool Ride! :tu:

Hi im not sure be best to get under there and have a look i guess. No i havent cut mine yet but will soon I just need some time!


Top
 Profile  
 
 Post subject: Re: Hi there EX lancer and L300 van
PostPosted: Sun Oct 16, 2011 11:01 pm 

Joined: Thu Jun 12, 2008 12:38 am
Posts: 28
lt2000ex wrote:
Fanatstic ride you have built, wish I had such talents. Van looks vey cool as well :tu:

Thanks


Top
 Profile  
 
 Post subject: Re: Hi there EX lancer and L300 van
PostPosted: Sun Oct 16, 2011 11:04 pm 

Joined: Thu Jun 12, 2008 12:38 am
Posts: 28
Image

Image

Image

Image

Image




A couple of old pics that i like. :D


Top
 Profile  
 
 Post subject: Re: Hi there EX lancer and L300 van
PostPosted: Tue Oct 18, 2011 12:47 pm 
User avatar

Joined: Tue Oct 18, 2011 3:47 am
Posts: 108
Location: Taytay..Miami,Texas,New Orleans,Italy, France,Germany,Spain, Mexico..etc...next year Asia JAPAN..
great work bro...i love it!

_________________
MAILBOX.group@facebook.com
https://sites.google.com/site/mailboxfacebookcom/


Top
 Profile  
 
 Post subject: Re: Hi there EX lancer and L300 van
PostPosted: Fri Oct 21, 2011 2:15 pm 
User avatar

Joined: Fri Oct 21, 2011 1:17 pm
Posts: 72
Location: Davis, Oklahoma
I love the van!! I would really like to lover mine. What did you use to lower yours? What kind of wheels are those??

_________________
1990 Mitsubishi Vanwagon


Top
 Profile  
 
 Post subject: Re: Hi there EX lancer and L300 van
PostPosted: Sat Oct 22, 2011 12:35 pm 

Joined: Thu Jun 12, 2008 12:38 am
Posts: 28
Costa wrote:
I love the van!! I would really like to lover mine. What did you use to lower yours? What kind of wheels are those??
The front have torsion bars so you can wind the front down, the rear I took some leaves out and put 5 inch blocks in. Of course that put it on the ground so you may not want to put blocks that big in unless you got a good driveway in and out of your house and you dont have to go over any judderbars.


Top
 Profile  
 
 Post subject: Re: Hi there EX lancer and L300 van
PostPosted: Sat Oct 22, 2011 12:45 pm 
User avatar

Joined: Fri Oct 21, 2011 1:17 pm
Posts: 72
Location: Davis, Oklahoma
I was thinking 3 inch blocks and crank the front to match. Did you have any alignment issues? Is there a correction for said issues?

_________________
1990 Mitsubishi Vanwagon


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 1 of 2   [ 38 posts ]
Go to page 1, 2  Next


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
610nm Style by Daniel St. Jules of Gamexe.net