My Skyline PC110-085366

Glomerus · **Posted:** Sun Apr 25, 2010 1:52 pm

So, I've received parts and made progress this weekend - fit new main brake cylinder and right ammo with calipers. So - photos.

Glomerus · **Posted:** Mon May 03, 2010 12:47 pm

The turn came for the left ammo with all levers, ball joints, steering trapezoid, silent blocks etc.
Now it is smooth suspension and silent steering.

New rims fit well - enough clearance to fit 205/70 tyres

[/url]

chokudoriDR30 · **Posted:** Fri May 07, 2010 3:33 pm

Пора уже красить тачку, братан :Р...

А вообще классная машина...

Совсем охуйеть. На Тоёте номер совсем допотопный. "ОТ"? Что ето за область?

Glomerus · **Posted:** Sun May 09, 2010 5:25 am

chokudoriDR30 wrote:

Пора уже красить тачку, братан :Р...
А вообще классная машина...
Совсем охуйеть. На Тоёте номер совсем допотопный. "ОТ"? Что ето за область?

Ok, pal, accepted - body restoration is the first priority 4 me. Now collecting money for it. Thanks for positive feedback.
Concerning corolla - yup, it my pal's KE26-V. Licence plates - Odessa region, after Ukraine independence in 1992 there were plates series OT & OI. Alike soviet signs. There is corolla's restoration thread - http://www.j-cars.info/forum/viewtopic.php?f=27&t=477

Going back to Nissan. Some progress again.
Rims painting - before and after
Trunk clean up with high water pressure
Trim disassemble
New front road clearance

dmg1979 · **Posted:** Sun May 09, 2010 5:24 pm

Hi Glomerus,
It looks like you have been a busy bee. Nice to see your car progressing. Mine is just running now but no bodywork done.

I would suggest also looking for someone who can fabricate panels for you. The rust around your fenders looks like it will take some work. I am planning to send my car to a guy who makes panels from scratch. I just redid my 65 beetle. I am planning for him to fabricate the rear panel, floorboards, bonnet and various other parts on my datsun.

Check out the pics below of my 65 floorpan. I actually sold off the floorpans I bought as this guy makes better panels in 1.2mm thick sheet. I am sure there are people around your area that can do equal or better!!! He also galvanized the panels before welding it on. MIght not be the best idea as it might promote rust with the bare steel it was welded to but I just wanted to experiment.

Glomerus · **Posted:** Mon May 10, 2010 12:45 am

dmg1979 wrote:

Hi Glomerus,
It looks like you have been a busy bee. Nice to see your car progressing. Mine is just running now but no bodywork done.

I would suggest also looking for someone who can fabricate panels for you. The rust around your fenders looks like it will take some work. I am planning to send my car to a guy who makes panels from scratch. I just redid my 65 beetle. I am planning for him to fabricate the rear panel, floorboards, bonnet and various other parts on my datsun.

Check out the pics below of my 65 floorpan. I actually sold off the floorpans I bought as this guy makes better panels in 1.2mm thick sheet. I am sure there are people around your area that can do equal or better!!! He also galvanized the panels before welding it on. MIght not be the best idea as it might promote rust with the bare steel it was welded to but I just wanted to experiment.

Good idea, pal! Thanks! :tu:

Glomerus · **Posted:** Sun May 23, 2010 4:22 am

Hey, folks! Nissan restoration continues. Here are new wheels and saloon rust elimination + trim cleaning activivties in May.
trim disassemble

dirt

wheels assemble

disks back painted

common sight

close look

comparison

first impression

close look

both fit

205/70 size vs 185/65 size look

before

after

left side

trim assemble beginning

sallon floor rust

rusty holes

back seat

floor after anticorrosive primer coating

front passenger seat

That's all folks! 2 b continued!

Mamutas · **Posted:** Mon May 24, 2010 4:12 am

You gonna restore this car or what? or ride till all skyline becomes big peace of rust ? :lol:

Glomerus · **Posted:** Mon May 24, 2010 9:01 am

Mamutas wrote:

You gonna restore this car or what? or ride till all skyline becomes big peace of rust ? :lol:

Dear Mamutas, have you got any information about how and why I restore my Nissan? I see - no :wink:

If you are interested and know russian - try to read threads I've posted in this thread's first post. If not - go by this thread!

Glomerus · **Posted:** Tue May 25, 2010 7:41 am

So, this weekend I've continued car's floor inspection. So I've found several (6) holes and that's all. Now floor is clean and drying to be coated with anticorrosive primer. New wheels give new look - brutal old car...

front left

front right

rear right

panoramic look

Mamutas · **Posted:** Tue May 25, 2010 11:56 am

Glomerus wrote:

Mamutas wrote:

You gonna restore this car or what? or ride till all skyline becomes big peace of rust ? :lol:

Dear Mamutas, have you got any information about how and why I restore my Nissan? I see - no :wink:

If you are interested and know russian - try to read threads I've posted in this thread's first post. If not - go by this thread!

Ok I will read :wink:

Glomerus · **Posted:** Sun Sep 19, 2010 5:45 am

Fresh pics update - 1 step from bodyworks

Glomerus · **Posted:** Fri Nov 19, 2010 11:13 am

A time has past and I have to share with JNCers with updates.
So, body work has started recently:

historic moment :mrgreen:

prepared for engine removing

Now the main problem to remove front glass unbroken. :roll:

Glomerus · **Posted:** Wed Dec 22, 2010 5:32 am

So, A little time past and it is time to show progress. Soon will remove drivetrain and engine.
See photo - in time order.

Glomerus · **Posted:** Fri May 27, 2011 3:58 pm

Here we go!!!

dmg1979 · **Posted:** Sat May 28, 2011 4:27 pm

Good to know that you are going all out to cure the car of it's rust. Can't wait to see the end results. Thanks for the pics!!!

Glomerus · **Posted:** Sat May 28, 2011 5:56 pm

dmg1979 wrote:

Good to know that you are going all out to cure the car of it's rust. Can't wait to see the end results. Thanks for the pics!!!

Thanks! How yours Sky is? On the road? :tu:

Glomerus · **Posted:** Thu Jun 02, 2011 10:26 am

Some progress, but long way ahead... The most rusty unabandoned car I've ever seen... :mrgreen:

Stay tuned! :tu:

Glomerus · **Posted:** Sun Jun 26, 2011 6:07 pm

Some progress with the right bottom side :tu:

stev · **Posted:** Tue Jun 28, 2011 7:31 am

hi Glomerus
do you still need g18 infos?
i have a g18 manual/part/info book.
i can send you copies if you need them?
cheers

nice car by the way,keep him alive :tu:

love it

My Skyline PC110-085366

Who is online