So, the EA-T

A old ladie owned it. 185000 km, bought in 1987 by a doctor, and sale to old people too.


The beast

[/url]

[/url]

Parked outisde after all years before i bought it, she was not very clean, but seems to be in quite good condition.

Engine bay :

[/url]


Inside :
[/url]

(With the special code like K2000.)

Suddently, something catch my eyes...

[/url]


WTF?..


It was pedobear

[/url]

Very nice, i will hook it to the mirror



At the beginning, i bought this car with a ignition problem, to manufacture parts, like fenders, bumpers, wings.... I repared it, and like i love this car, and like she got fex rust, i will restore

I already manufacture a rear wing for her

[/url]

[/url]


I already do:

- Clean inside the car and refix all plastic panels
- Clean the engine bay
- Find the rust
- Repare brakes (I bought it with no brakes too )

I already find my wheels, a set of 4 GOTTI wheels in 13", 14" ou en 15", or all I did not already chose my model

More pics later, i will cleaned it before

TherealstarX26, successful remediation of the car. And more photos of the work undertaken. By the way, bear forced smile

Thanks

I will take more pics as soon as possible

I already started to manufacture the prototype of the rear bumper. It's the proto, made in 2 days. Not very clean, very basic, but very good to work on it



I will make a JDM rear bumper. My the licence plate support is too rusty, so i will change it. I have to repair the rear of the car under the bumper, because i saw that one last owner back into a pole or other. There is lot of rust, and i have to reform the rear part.

I found rust under the side skirts too. 2 cm wide by 20 inches long.

very clean looking civic, i hope u get the panels and paint sorted, so is this a french car, where is it exactly i wonder

_________________
1965 Honda S600 Fastback Coupe
1987 Nissan Fairlady Z31 200ZG with RB20DET

The car wil be paint
You wuld like to know where the car is located?



Thanks

Update!

I knew that the car got a schock at the rear. I noticed that side skirt got rust too.


Good repare from a last owner...

And rust on side skirt like i said.


But the worse, under the rear bumper...





The body panel is twisted. Either i cut this part and meld another part, or either i restor this one.

I already purshased some gift

- Timing belt
- Oil filter
- 4 spark plug NGK

My father made my new wheels too

In 13", i have to check the width, and to choose tires

I made a special tool for the timing belt;)



Test : Pass



I changed it

Ensuite restauration du support de batterie qui était pas mal abîmé, corrodé à cause de l'acide de batterie :

After that, i restored the battery holder, because there was rust with the bettery acid.



New front calipers from an EF3



I have to choose the other parts to finish the new brake setting

I got 2 fenders and the front panel about the 1G CRX I will manufacture them

New

I made a front lip for AH and AF





And in next week, i will manufacture the rear wing

I will post more pics soon

you do know that the AH and AF are different widths, correct? nice project though.

Thanks

OEM lips are differents, but this one is made for both cars

The front lip and the wing are finished













I have to manufacture the rear JDM bumper, to change front brakes with my new setup, to the clean the car inside and outside, and go on the road

And after, rust

Lip on the front bumper





I didn't work on my car, but you can see my parts on this car

http://imageshack.us/photo/my-images/37 ... copie.jpg/

But i worked on other parts, like this one





It's a prototype, i will finish it soon

vary nice work so far! am curios to how your creating your parts. fiber glass?

very nice

_________________

Thanks

Yes my parts are in fiberglass or carbon

I made the same parts for a customer :

http://img37.imageshack.us/img37/6309/p1010615copie.jpg

I am even more exited to finish my projet

woop woop!
so i take it you guys have your own custom shop in the back yard ;P

Yes i created my own company. I manufacture my own parts

:O
awesome! hope bizz is doing well ^^

My company is very young, so it's quite hard to begin, but i got good feedback about my parts, so it seems to be good for the rest

good to here! now just need to get the word out ^^

hi buddy, where in france are you located?

i found a similar civic of yours in the junkyard here in geneva, switzerland..

I am from the south of France. Nearly 250km from Switzerland

No update about my 3G for the moment. I worked on other car.

But for CRX 1G, i made this







Next, front fenders, door panels, sideskirts, racing front lip like a already do for my AH.

And in few time i hope, i will repear rust on it, and go on the road