ssr mk iii 15x10 -24 refinished

dimsum · **Posted:** Sun Oct 03, 2010 8:27 pm

This is the third wheel that I have tested. If you notice there are 16 bolts instead of the traditional 6, 8, 12 depending on the year. Most of the SSR Techno series if not all are welded 3pc. Because they are welded the bolts were use just for aesthetic reasons. Well after testing a few, I have decided to make them with 16 since this is the minimum amount that can be used without any failure. I could of done 12 but didn't want to test the limits. Now I can do them in 8 bolts but that would mean I would have to weld the wheel up like the original specs. The way I chose would allow the wheels to be true modular. BTW, these use to be 14x6.5 +12

Garant · **Posted:** Sun Oct 03, 2010 8:36 pm

wow are you doing these yourself??? you have a shop or?

dimsum · **Posted:** Sun Oct 03, 2010 10:11 pm

I design and figure out the ins and outs then out source it.

dimsum · **Posted:** Sun Oct 03, 2010 10:14 pm

waht do you think about the 16 bolts? too many or worth the mod to make them safe and modular

Norcal510 · **Posted:** Mon Oct 04, 2010 6:44 am

dimsum wrote:

waht do you think about the 16 bolts? too many or worth the mod to make them safe and modular

Wheels look real nice :tu:

Do you have pictures of the before & after?

dimsum · **Posted:** Mon Oct 04, 2010 11:16 am

this is the original 14x6.6 +20

¤gregzilla¤ · **Posted:** Mon Oct 04, 2010 12:36 pm

bad ass!!!

Norcal510 · **Posted:** Mon Oct 04, 2010 2:58 pm

¤gregzilla¤ wrote:

bad ass!!!

I agree. So do you do this for a living?

dimsum · **Posted:** Mon Oct 04, 2010 6:27 pm

do it as a hobby with a little money on the side. I run epicbmx.com for a living

FjFairlady · **Posted:** Tue Oct 05, 2010 7:39 pm

Who's making the barrels? Nice job by the way. The 16 bolts look way better than just 8 or 12.

dimsum · **Posted:** Tue Oct 05, 2010 8:32 pm

if you guys want any wheels done, give me
a call. 714-786-7782

brownmagic · **Posted:** Sun Dec 05, 2010 2:55 pm

I have some SSR Star sharks id like you to widen.

Can I text you?

ewokracing · **Posted:** Wed Dec 08, 2010 1:36 am

I think I've seen your work on retro rides as well?

The wheels look great.

syco781 · **Posted:** Sat Dec 18, 2010 3:45 pm

do you only work with SSR's, cuz I have sone 14" Fortran mesh wheels Id like to widen.

Eric · **Posted:** Sun Dec 19, 2010 12:10 am

That is pretty nice

backspinstarlet · **Posted:** Sun Dec 19, 2010 1:27 pm

how's the balance of the wheel?

dimsum · **Posted:** Fri Jan 14, 2011 9:40 pm

new number 714-737-3430. if somebody need any service. no homo okay

toji004 · **Posted:** Sun Feb 27, 2011 11:33 am

syco781 wrote:

do you only work with SSR's, cuz I have sone 14" Fortran mesh wheels Id like to widen.

http://forums.club4ag.com/zerothread?id=79098

dimsum · **Posted:** Sat Mar 12, 2011 10:46 pm

depends on the center diameter. I can do other brands. I choose SSR because they r popular

shoebox5 · **Posted:** Wed Mar 16, 2011 11:18 pm

I read one of your other posts on a corolla forum, I think... and you were saying something about possibly keeping some of the wheels 8 bolt? Is that after you weld the barrels? Or just sealant? Will the 8 bolts be strong enough to withstand daily driving? I know you said they are not for racing... but I would be concerned for normal driving wear and tear...

ssr mk iii 15x10 -24 refinished

Who is online