my MMC Galant Sigma Super Saloon '85

didotooo · **Posted:** Sat Apr 10, 2010 5:17 pm

Hi All

Im Dido from Bulgaria . I have only one in my country mitsubishi galant sigma.The car was a former Japanese ambassador to Bulgaria.

I bought it with a blocked engine - riding without oil ...My dad make overhaul of the engine and the grinding of the crankshaft. I need some body parts. Can anybody help? Thanks!

engine: G63B
N:е15а-0606722
model:e-e15a trhg
4 speed automatic ;4 cylinder carburateur ;right-hand drive

ben · **Posted:** Sat Apr 10, 2010 8:44 pm

That's quite the restoration project. Sorry, I can't help with parts, as these are pretty rare in the US too. Maybe try Australia?

I like your avatar, Welcome to JNC!

fuel · **Posted:** Sun Apr 11, 2010 1:31 am

Australians had a similar car called the Magna, but they weren't hard top like yours and they were actually wider than the Galant/Sigma platform. Best to try Japan or here in New Zealand as we had many of these cars come in as used imports during the 90s. But they are starting to get thin on the ground here too. I would absolutely love to find an E18A Eterna Duke 3.0 V6 hard top.

didotooo · **Posted:** Sun Apr 11, 2010 10:33 am

Yeah ...my car parts fit saporo's. I look on sites in parts of New Zeland
or Germany ... today i have a problems with carburateur ... will now set up and clean it up, I hope you do not have to look new. Thanks for the kind words is a great site! If you find some information about parts tell me:) Good luck with your project! and sory for my english:)

didotooo · **Posted:** Mon Apr 12, 2010 6:13 am

ahahh thanks man

yes its great car i love it

draws attention to the streets, I can not wait to finish her and is back on the road!

didotooo · **Posted:** Tue Apr 13, 2010 1:32 pm

i have a big problem with carburateur

(( i need another for parts.... mikuni for g63b ...

KresSlyda180 · **Posted:** Tue Apr 13, 2010 8:17 pm

didotooo wrote:

i have a big problem with carburateur

(( i need another for parts.... mikuni for g63b ...

If you can't get an original Mitsu carburetor... try sourcing yourself a Weber performance carburetor. Alotta people swear by them for reliability and performance.

didotooo · **Posted:** Wed Apr 14, 2010 2:21 am

Can you point at me where to look for one? and what they cost...thanks!!

Old Colt · **Posted:** Wed Apr 14, 2010 3:38 am

Very nice work on your project. That will be an impressive car to drive in.
The Carburetor and exhaust should be something you can find. They were used in many other Mitsubishi cars with that engine as well as the 4G62. It is possible you might find an exhaust that does not have the catalyst in it that will need a different front exhaust. This will be more reliable in the long run.
The carb off of the 2.6L engine may work for you also as a core to build from. You may need to use the jets from your carb to get the mixture right.

KresSlyda180 · **Posted:** Wed Apr 14, 2010 11:45 am

didotooo wrote:

Can you point at me where to look for one? and what they cost...thanks!!

You can try Ebay or www.webercarburetor.com

city hunter · **Posted:** Thu Apr 15, 2010 2:05 am

I might have a 4g64 exhaust manifold, non cat, much better flow if you need it. Just pay shipping from usa

What carb parts do you need? I have a few spare crap 2.6 carbs laying around I would gladly pull crap off of if you need anything.

The weber is definately a easy alternative. I ran one on my 1.6 after my stock carbs secondary froze up.

kot · **Posted:** Wed Oct 20, 2010 2:09 am

Quote:

I need some body parts. Can anybody help?

i have one similar car, but not many parts. Maybe some body and inner details may be useful for you. But transportation to Bulgaria from Russia is not cheep.....

didotooo · **Posted:** Wed Oct 20, 2010 1:32 pm

Do you have a pictures on your car? my car runs great, but 30 l/100 km benzin :lol:

need new carb

kev84 · **Posted:** Wed Oct 20, 2010 6:03 pm

well that car is super rare in bulgaria i bet, i wonder if the ambassador itself have any problems driving on the wrong side of the drivers side lol

didotooo · **Posted:** Thu Oct 21, 2010 9:41 am

yeah axaxha i don't now how many wears driving in bulgaria this galant ,but have a kick in right side ,and glass its broken... its good that no frontal crash :lol:

kot · **Posted:** Thu Oct 21, 2010 8:53 pm

30l/100km? Does your car "eat" a motor oil too? Maybe not only problems with carb?

didotooo · **Posted:** Fri Oct 22, 2010 11:21 pm

kot wrote:

30l/100km? Does your car "eat" a motor oil too? Maybe not only problems with carb?

yeah ... my car eat motor oil,but after change segments and other things its allright ... carburetor is filled with gasoline and blends... have problem with electro jets ....

kot · **Posted:** Sun Oct 24, 2010 11:37 am

i guess you don't want to place "not original" carb there? I have a problem with it, too: when idle, r/pm's goes up to 2500-3000, and no specialists who can adjust it..

didotooo · **Posted:** Fri Sep 02, 2011 2:47 am

Hi all! I show you some progress on my car

I bought another galant but not like my its gls ... only fit engine parts and suspension...

didotooo · **Posted:** Fri Sep 02, 2011 2:52 am

one galant die to save another! hah

my MMC Galant Sigma Super Saloon '85

Who is online