#
It is currently Thu Nov 27, 2014 2:09 pm


Post a new topicPost a reply Page 2 of 2   [ 25 posts ]
Go to page Previous  1, 2
Author Message
 Post subject:
PostPosted: Fri Oct 15, 2010 11:10 pm 
User avatar

Joined: Tue Apr 20, 2010 1:07 am
Posts: 135
Location: philippines
Old Colt wrote:
the ignition from an early Montero will fit in.


its running the stock 4g32 chain type distributor, i'm not familiar with the montero engine, is it the 4g54?, if it is then i'll just get a 4g54 distributor then install it on the 4g32, is it? :)


Top
 Profile  
 
 Post subject:
PostPosted: Sat Oct 16, 2010 3:33 am 
User avatar

Joined: Sat Feb 16, 2008 4:30 am
Posts: 185
Location: East Wallyworld Vermont USA
There were two types of dizzys in the G32. One has the point plate mounted with screws that pass through the alloy body into the plate from the outside.
And the one I have pictured here the screws come down from the top, inside the housing. Turns out some of the later dizzys are the same on the inside even though they mount up in the head. The mounting screws are under the pickup out of site.
The only modification I had to do was shorten the vacuum advance arm so it clocks the new pickups properly.
This system works flawlessly compared to the aftermarket conversions.
When looking for a later dizzy some have the advance unit up on top, these do not work for a retrofit. When you find one with the advance underneath it will probably work for you. It has been about 8 years since I did this swap so some of my details are a bit fuzzy.

_________________
Cheers,
Charlie
If it ain't broke, modify it.
faster, Faster, FASTER, Over the hill and accelerating.
http://classiccolt.forumcircle.com
http://www.cardomain.com/id/Old-Colt
www.ffmsd.com


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 18, 2010 8:05 am 
User avatar

Joined: Tue Apr 20, 2010 1:07 am
Posts: 135
Location: philippines
thanks, thats very useful :D


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 18, 2010 8:17 am 
User avatar

Joined: Sat Feb 16, 2008 4:30 am
Posts: 185
Location: East Wallyworld Vermont USA
I just noticed you are in the Philippines,
There were a number of Hyundais that shared the G3x engine that had a breakerless ignition.
Also take a look in the L300 and box type Lancers.
The Montero/Pajero with the 4G54 is the dizzy I used. A suitable ignition should be in some later Galant and Sigmas as well.

_________________
Cheers,
Charlie
If it ain't broke, modify it.
faster, Faster, FASTER, Over the hill and accelerating.
http://classiccolt.forumcircle.com
http://www.cardomain.com/id/Old-Colt
www.ffmsd.com


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 19, 2010 5:25 am 
User avatar

Joined: Tue Apr 20, 2010 1:07 am
Posts: 135
Location: philippines
i already compared it to the L300s(4g63) and the box types(4g32 belt type) but they were different, i think one of them is too shallow to fit the other mechanism from another, maybe i'll try to look for that hyundais or 4g54s


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 2 of 2   [ 25 posts ]
Go to page Previous  1, 2


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
610nm Style by Daniel St. Jules of Gamexe.net