74 TA22 - with 3t! need help :s

19gardner88 · **Posted:** Wed Oct 28, 2009 1:04 am

Hi all,

Im new to the site, and bought a ta22 celica witha 3t engine in it for AU$500. unfortunately ive had a few snags with the engine Nothing to hard though.

Have 1 issue what goes in here? is there spose to be a bolt just to block it off or is there something else that should belong??

Cheers Guys,

Dave

Long · **Posted:** Wed Oct 28, 2009 1:18 am

Welcome to jnc Dave!

Post up some pics of the car! Good job on the buy, I've been scouring the net for Celica's in Vic for awhile now.

As for your query, I can't help sorry

toyota1515 · **Posted:** Wed Oct 28, 2009 5:12 am

If you have the non EGR water neck that bolt there is not used!

19gardner88 · **Posted:** Wed Oct 28, 2009 9:11 pm

can you provide a pic of "non EGR water neck" im guessing i dont have it but just want to make sure :oops:

Thanks

KurumaOtaku · **Posted:** Wed Oct 28, 2009 9:40 pm

NON-EGR (Exhaust Gas Regulator) water neck

water neck with EGR (that round hat looking thing)

water neck with EGR blocked off (with block off plate)

Here is a BRD built motor with the NON-EGR water neck. Notice that bolt hole was unsused also.

Hope this helps.

19gardner88 · **Posted:** Fri Oct 30, 2009 4:03 am

Thanks champ, will get it all back together tomorrow now! and then might get a few pics of my $500 beast

silverra23 · **Posted:** Sun Nov 01, 2009 9:56 pm

have you joined up on www.toymods.net yet - there is about 800 pages worth of forum threads on old celicas. we love them there

gryffinwings · **Posted:** Sun Nov 01, 2009 10:41 pm

This is kinda interesting, using a picture of my engine as reference.

gryffinwings · **Posted:** Sun Nov 01, 2009 10:44 pm

And for all of you people, those are "ALL" the "WRONG" answers. That is in fact used for bolting on the tensioner pulley for the Power Steering pump, and yes this is a fact, I built this very engine myself. And again that is my engine at the top of this thread.

toyota1515 · **Posted:** Mon Nov 02, 2009 12:47 am

19gardner88 · **Posted:** Wed Nov 04, 2009 1:46 am

gryffinwings wrote:

And for all of you people, those are "ALL" the "WRONG" answers. That is in fact used for bolting on the tensioner pulley for the Power Steering pump, and yes this is a fact, I built this very engine myself. And again that is my engine at the top of this thread.

Yer thanks for that mate

74 TA22 - with 3t! need help :s

Who is online