#
It is currently Tue Oct 21, 2014 8:50 am


Post a new topicPost a reply Page 1 of 1   [ 16 posts ]
Author Message
 Post subject: My Twin turbo 1uz ra21
PostPosted: Wed Jul 16, 2014 12:49 pm 

Joined: Wed Jul 16, 2014 12:41 pm
Posts: 5
Figured I'd post up a current pic of my project

Image

Image

It's not anywhere near finished yet but it at least fires up and is capable of moving under it's own power now.

Specs:
-1973 ra21 I found in a farmers field that had been parked for 27yrs
-Twin precision billet 6262 ball bearing turbos t4 0.58Ar
-1990 Lexus 1uzfe (have a full Ross/TTC/crower setup to build up another block)
-Injector dynamics 1000cc injectors
-Megasquirt3-pro running full sequential fuel and spark (2uz cop's)
-Tremec t56 magnum, QuickTime LS bellhousing, custom cromoly flywheel, custom engine side adapter plates, spec stage4 clutch
-intake manifold is all custom lower with a holley LSx upper plenum cover
-rear axle is currently an 8" 2wd pickup axle narrowed to 51" with mustang SVO 11.3" rotors
-front suspension is a TotalCostInvolved mustang2 setup


Top
 Profile  
 
 Post subject: Re: My Twin turbo 1uz ra21
PostPosted: Wed Jul 16, 2014 7:00 pm 
User avatar

Joined: Sat Feb 05, 2011 5:53 pm
Posts: 329
Location: Bay Area, California
Goodness gracious what a beast!

More photos!


Top
 Profile  
 
 Post subject: Re: My Twin turbo 1uz ra21
PostPosted: Thu Jul 17, 2014 7:46 am 
User avatar

Joined: Sat Nov 20, 2010 7:39 pm
Posts: 284
Location: NC
:shock: Damnit bobby, thats a hellabeast! If youre not careful you may suck a small child into your engine going down the street. :twisted:

_________________
1970 corona MKII wagon (22RE swap)
Many other car/truck/bike projects

http://japanesenostalgiccar.com/forum/viewtopic.php?f=9&t=12289
^Heres my build thread^

Packergreg wrote:
Hezath wrote:
Wagons pull the bitches


That's how they got the old expression "Wagons Ho!"


Top
 Profile  
 
 Post subject: Re: My Twin turbo 1uz ra21
PostPosted: Thu Jul 17, 2014 9:25 am 

Joined: Wed May 23, 2012 8:28 pm
Posts: 180
Location: COSTA RICA, CENTRAL AMERICA.
is scary this project!

can imagine the power that must emanate from that monster V8

congratulations! keep updated!

there are videos working? :twisted: :twisted: :twisted: :twisted: :twisted: :tu: :tu: ♥ ♥ ♥ ♥


Top
 Profile  
 
 Post subject: Re: My Twin turbo 1uz ra21
PostPosted: Fri Jul 18, 2014 7:57 am 

Joined: Tue Nov 08, 2011 2:19 pm
Posts: 104
Location: texas
that is very beastful!!!! a build thread perhaps?


Last edited by 10psitx on Fri Jul 18, 2014 7:59 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: My Twin turbo 1uz ra21
PostPosted: Fri Jul 18, 2014 7:58 am 
User avatar

Joined: Mon Apr 18, 2011 8:47 am
Posts: 280
Location: TX
how are you going to post pictures like that and no vids of it running?

for the coilpacks, did you cut off the mounting ears and use the spark plug covers to keep them in place?

_________________
Image


Top
 Profile  
 
 Post subject: Re: My Twin turbo 1uz ra21
PostPosted: Fri Jul 18, 2014 10:56 am 
User avatar

Joined: Mon Jul 15, 2013 7:11 am
Posts: 66
Had to scroll back up to the topic when I saw the tube frame, was thinking "Wait, this is a celica right?". Nice job bringing her back to life :tu: . Gotta agree with travmac79, put a filter on the turbo's, you're bound to suck a lot of stuff with those, dirt, grass, leaves, a small dog, a passerby.... :mrgreen:

_________________
Real men have "carbs"


Top
 Profile  
 
 Post subject: Re: My Twin turbo 1uz ra21
PostPosted: Fri Jul 18, 2014 2:54 pm 

Joined: Wed Jul 16, 2014 12:41 pm
Posts: 5
Gene wrote:
Had to scroll back up to the topic when I saw the tube frame, was thinking "Wait, this is a celica right?". Nice job bringing her back to life :tu: . Gotta agree with travmac79, put a filter on the turbo's, you're bound to suck a lot of stuff with those, dirt, grass, leaves, a small dog, a passerby.... :mrgreen:



Oh yeah no worries, they'll get filters before actually being driven, the build thread is over here at dorikaze http://www.dorikaze.net/showthread.php? ... ight=Zongo

There will be plenty of videos once I finish up some little stuff and get it on the dyno


Top
 Profile  
 
 Post subject: Re: My Twin turbo 1uz ra21
PostPosted: Fri Jul 18, 2014 3:09 pm 

Joined: Wed Jul 16, 2014 12:41 pm
Posts: 5
lolumad wrote:
how are you going to post pictures like that and no vids of it running?

for the coilpacks, did you cut off the mounting ears and use the spark plug covers to keep them in place?


Yeah I trimmed the ears off and the covers retain them


Top
 Profile  
 
 Post subject: Re: My Twin turbo 1uz ra21
PostPosted: Mon Jul 21, 2014 8:24 am 

Joined: Mon May 05, 2014 9:13 am
Posts: 10
Location: Los Angeles, CA
Jesus Christ! Amazing sir!


Top
 Profile  
 
 Post subject: Re: My Twin turbo 1uz ra21
PostPosted: Thu Jul 24, 2014 9:02 am 
JNC Enthusiast

Joined: Fri Feb 15, 2008 11:16 pm
Posts: 790
Location: Saratoga N.Y.
Im sure you got lot of questions at the show.

If youre not careful you may suck a small child into your engine.{Funny} :lol:

_________________
Image


Top
 Profile  
 
 Post subject: Re: My Twin turbo 1uz ra21
PostPosted: Thu Jul 24, 2014 9:14 am 

Joined: Tue Jan 14, 2014 11:51 am
Posts: 6
Location: Lexington, Kentucky
More....more! That is wicked!


Top
 Profile  
 
 Post subject: Re: My Twin turbo 1uz ra21
PostPosted: Fri Aug 29, 2014 6:13 pm 

Joined: Wed Jul 16, 2014 12:41 pm
Posts: 5
This is why I've been too busy to post

Image

Early block and heads
Ross 9.5:1 .040 pistons
TTC chromoly I-beam rods w/arp2000 bolts
ACL main and rod bearings
ARP head studs
Crower 264/272 cams
Cometic MLS gaskets
Etc

Time to get it together and turn up the boost!


Top
 Profile  
 
 Post subject: Re: My Twin turbo 1uz ra21
PostPosted: Sat Sep 13, 2014 4:51 pm 

Joined: Wed Jul 16, 2014 12:41 pm
Posts: 5
Image


Top
 Profile  
 
 Post subject: Re: My Twin turbo 1uz ra21
PostPosted: Sun Sep 14, 2014 12:37 am 

Joined: Sun Sep 02, 2012 9:47 am
Posts: 87
Location: Central NJ
Fantastic!


Top
 Profile  
 
 Post subject: Re: My Twin turbo 1uz ra21
PostPosted: Thu Sep 18, 2014 8:15 am 
User avatar

Joined: Mon Apr 18, 2011 8:47 am
Posts: 280
Location: TX
Image

_________________
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 1 of 1   [ 16 posts ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
610nm Style by Daniel St. Jules of Gamexe.net