#
It is currently Sun Nov 23, 2014 10:23 pm


Post a new topicPost a reply Page 1 of 1   [ 7 posts ]
Author Message
 Post subject: 5M aftermarket weber/holley/etc options?
PostPosted: Mon Jan 27, 2014 10:58 pm 

Joined: Mon Aug 05, 2013 3:34 pm
Posts: 6
Location: Qld, Australia
Hey guys,
ive searched and searched to no avail, so I thought I would just start a thread.
I've got a 77 mx32 Cressida, which has been fitted with a 5M engine. It goes great, but having some problems with the stock carby set up (as well as having 50 million ugly and unnessessary hoses and tangled mess hanging off the side)

I'm wondering if there's any options for an aftermarket carby setup for this engine?? (something old school cool, similar to a triple weber set up etc would be rad) anything at all, I really want to get rid of this stock set up and clean up the engine bay as much as I can.

Any help at all is greatly appreciated

Kez


Top
 Profile  
 
 Post subject: Re: 5M aftermarket weber/holley/etc options?
PostPosted: Wed Jan 29, 2014 10:05 am 
User avatar

Joined: Sat Jan 10, 2009 10:06 pm
Posts: 55
Location: Curaçao
Back then there was someone on Classicrown that mentioned one of the Weber carbs that was pretty much bolt on with little modification to the insulator plate holes. I don't remember which model Weber it was though. :(

_________________
1984 Toyota Crown: 6M-GE swap in progress
1988 Toyota Hilux: getting worked back to life


Top
 Profile  
 
 Post subject: Re: 5M aftermarket weber/holley/etc options?
PostPosted: Fri Feb 07, 2014 5:04 am 
User avatar

Joined: Sat Sep 18, 2010 4:20 am
Posts: 33
Location: australia
Yes that would have been me way back then lol.As you are from Aus like me then this should be easy.Find a Weber from either an XE or XF Falcon,Im unsure off the top of my head what size it is but all you need to do is enlarge or slot the bolt holes to suit the M manifold,Change the manifold studs for longer studs or if your lucky to get the Falcon manifold as well,use the studs from this as they are metric like the M manifold.NO ADAPTER IS REQUIRED.Then its throttle linkage setup which I cant tell you how to do as this was done on a 40 series Crown and Re-Jetting.
Cheers Brett.


Top
 Profile  
 
 Post subject: Re: 5M aftermarket weber/holley/etc options?
PostPosted: Tue Feb 11, 2014 4:47 am 
User avatar

Joined: Sat Jan 10, 2009 10:06 pm
Posts: 55
Location: Curaçao
Ha, nice! Whatever happened to CC, did it die out with the switch to Multiply?

_________________
1984 Toyota Crown: 6M-GE swap in progress
1988 Toyota Hilux: getting worked back to life


Top
 Profile  
 
 Post subject: Re: 5M aftermarket weber/holley/etc options?
PostPosted: Mon Feb 17, 2014 3:08 pm 

Joined: Mon Aug 05, 2013 3:34 pm
Posts: 6
Location: Qld, Australia
AWESOME! thanks heaps for the heads up, this is just what we wanted to find, something that could fit with minimal modifications etc.

ill have a look around and see what I can find :)

thanks again, it's great to know some people are still willing to share their knowledge!


Top
 Profile  
 
 Post subject: Re: 5M aftermarket weber/holley/etc options?
PostPosted: Mon Feb 17, 2014 3:30 pm 

Joined: Mon Aug 05, 2013 3:34 pm
Posts: 6
Location: Qld, Australia
does 34ADM ring a bell @crowncustom?


Top
 Profile  
 
 Post subject: Re: 5M aftermarket weber/holley/etc options?
PostPosted: Tue Feb 18, 2014 12:46 am 
User avatar

Joined: Sat Sep 18, 2010 4:20 am
Posts: 33
Location: australia
That would be the one mate.Im happy to share my 25-30yrs of Toyota experience.
Cheers Brett.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 1 of 1   [ 7 posts ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
610nm Style by Daniel St. Jules of Gamexe.net