My ground is braded copper and goes to the body where the coil bracket mounts and than over to the end of the valve cover. One cable with (2) tabs off it (1) at the end and the other at the middle over the coil.
I will look in my manuel for the other question.
Okay, thanks. I assumed there should be a body ground; I took care of that one now.
I kind of figured out what is going on with the pos. cable. There is a white wire running down the fender that goes to the rectifier; the previous owner just cut that wire and ran each end to the battery, I will splice that back together. I found a wiring diagram. It looks like the positive cable is supposed to go down to the starter and off of the starter there would be a fused white wire that would go power everything else. I need to know where that white wire goes and connects to the rest of the harness.