Page 1 of 6 123 ... LastLast
Results 1 to 10 of 53

Thread: Corona Mark II windshield and door gaskets interest

  1. #1
    Senior Member
    Join Date
    Aug 2009
    Location
    Spokane, WA
    Posts
    280

    Corona Mark II windshield and door gaskets interest

    I trying to find out how many people would be interested in purchasing a complete or individual gasket/weatherstrip set for Corona Mark II 1972 - 1976 MX20/MX23 or RX20/RX22/RX23 chassis codes. I just pulled my windshields out of my parts car and managed to save most of the gaskets. If there is interest I am going to start trying to get quotes and possibly send in my gaskets for duplication. I am going to try to get information on as many weatherstripping as possible including the trunk, front windshield, rear windshield, side rear windows (between two roll up windows), upper window channels, and door seals to maybe get a complete set put together for anyone interested. I have a couple of companies to check out if anyone else has any companies that they would like for me to check give me a shout and I will check on them as well. I know there are a few out there interested since this has been talked about before... sorry I don't remember exactly who right now.

    Best Regards
    Aaron

  2. #2
    Member
    Join Date
    Sep 2010
    Location
    Belgium
    Posts
    93

    Re: Corona Mark II windshield and door gaskets interest

    Hi,

    I'm interested. I've made a simular topic in the past. I went to a couple of companies here in Belgium but they were all way to expensive.
    I hope you have more luck.

    grtz

  3. #3
    Senior Member
    Join Date
    Sep 2010
    Location
    Albuquerque NM
    Posts
    240

    Re: Corona Mark II windshield and door gaskets interest

    This guy is interested. :tu:

    as of now, i'd go for a whole kit.

  4. #4
    Senior Member
    Join Date
    Jun 2008
    Location
    Los Angeles, California
    Posts
    573

    Re: Corona Mark II windshield and door gaskets interest

    I am interested in front and back winshield gaskets.

    Thanks

  5. #5
    Senior Member
    Join Date
    Aug 2009
    Location
    Spokane, WA
    Posts
    280

    Re: Corona Mark II windshield and door gaskets interest

    OK sounds good. I will get with some of the companies and see if we can get something figured out. Smetje you interested in full kit or just front and rear windshield? If anyone else is interested please let me know... I am sure it will be cheaper the more people we get.

  6. #6
    Member
    Join Date
    Sep 2010
    Location
    Belgium
    Posts
    93

    Re: Corona Mark II windshield and door gaskets interest

    Most important is the back window, I would like to have 2 off them.
    But, depending on how much it costs, I would take the full set.

  7. #7
    Senior Member
    Join Date
    Aug 2009
    Location
    Spokane, WA
    Posts
    280

    Re: Corona Mark II windshield and door gaskets interest

    Ok I will keep you guys posted on details as I get them. If anyone else is interested just let me know and I will update quantities with the companies.

  8. #8
    Senior Member
    Join Date
    Aug 2009
    Location
    Spokane, WA
    Posts
    280

    Re: Corona Mark II windshield and door gaskets interest

    Got quotes out to a few companies... Still have a bunch to go. I will let you know when I find out something further.

  9. #9
    Senior Member
    Join Date
    Aug 2009
    Location
    Spokane, WA
    Posts
    280

    Re: Corona Mark II windshield and door gaskets interest

    So far... little luck... still waiting for responses from about 5 companies. Have one outright no. Have 2 possibles. Getting dimensions and drawings to them currently.

  10. #10
    Senior Member
    Join Date
    Aug 2009
    Location
    Spokane, WA
    Posts
    280

    Re: Corona Mark II windshield and door gaskets interest

    Ok, so I received a few replies. Most of them were bad news... Got a few possibles. Talked to a Japanese national that was really suprised to see my car. He told me he drove one of the exact same cars 35 years ago. Gave a number to call to talk to that he said that I could order all the seals from. I am still exploring the matter. Unfortunately I do not speak or read Japanese. I will have to go talk to the guys at our information center and have them give them a call for me. I will let you know more as the details come.

Similar Threads

  1. WTB: Corona Mark 2, RX12 1973 set of outside door handles
    By masi_71 in forum Toyota Swap Meet
    Replies: 1
    Last Post: 01-03-2015, 05:56 PM
  2. WTB: Toyota Corona Mark II Coupe MX23 Door Cards/Dash
    By domdom22 in forum Toyota Swap Meet
    Replies: 4
    Last Post: 04-03-2013, 10:34 AM
  3. toyota corona mark 2 mx 10 sedan windshield rubber
    By cliov6 in forum Toyota Swap Meet
    Replies: 1
    Last Post: 07-23-2012, 01:35 AM
  4. 73 & 74 Corona Mark II 2 door lovers
    By theunstated in forum Ad / Auction Finds
    Replies: 0
    Last Post: 01-16-2012, 07:47 AM
  5. Corona interest
    By OkieRA29 in forum Junkyard Finds
    Replies: 12
    Last Post: 01-04-2011, 02:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •