Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Two N600's!

  1. #1
    Senior Member
    Join Date
    Dec 2009
    Location
    Netherlands
    Posts
    615

    Two N600's!

    Hi, i am going to buy two n600's next week. One of the cars has no wheels on it, to get it home i must have something to roll it on so can anyone please tell me what size/pcd/offset wheels can i fit under the car?
    If i know this i can get me some wheels to take with me when i go and pick up the two cars.

  2. #2
    Member
    Join Date
    Jul 2009
    Location
    Essex, UK
    Posts
    37
    They are 10*4.5" around ET45 with a 110mm pcd.

    This PCD is almost impossible to find as it was only used on these early honda's plus early mazda's mk1 rx7 rims would go on to roll it but you may not get the tyres under the arches. as they are 145/80R10.

    you could maybe get some scrap wheels off an old ford fiesta which is 108*4 and file the holes to allow you to move it about.

    I have an N which i'm about to start restoring and 2 Z's and have had to buy wheels in from japan using the yahoo auctions site.

    If each car still has its spare use those on the front and find a trolley with wheels to go under the rear beam axle as it is very light, should allow you to move it around and get it on a trailer.

    If it has also lost its wheel nuts you'll need M10*1.5 nuts with a 60degree taper.

    For info.

    A lot of quad bikes also use 4*110pcd but the wheel nuts are generally M10*1.25 so the pitch is wrong.

    Good luck, these are getting really hard to find in europe, keep us updated on your progress.

  3. #3
    Senior Member
    Join Date
    Dec 2009
    Location
    Netherlands
    Posts
    615
    Now thats a great piece of information, thank you very much.
    If i get the cars in my garage ill take some pictures and post them here.

  4. #4
    Senior Member
    Join Date
    Dec 2009
    Location
    Netherlands
    Posts
    615
    Just got the paperwork for both cars, will go and pick them up this saturday!
    Cant wait to have them in my garage and get them up and running again.

    Speaking of running, they run on normal fuel? because of the 2 cilinder engines..

  5. #5
    Senior Member
    Join Date
    Mar 2009
    Location
    CALI
    Posts
    181
    yes pump gas is fine. cant wait to see some pics.

  6. #6
    Senior Member
    Join Date
    Dec 2009
    Location
    Netherlands
    Posts
    615

    Picked up these two today,

    The blue one, after some fiddling i drove it home for 150 kilometers without any problems.
    The red/brown/grey/green one came with me on the cartransporter.
    I got two spare engines with it.

    Some quick on the way pictures:









    I am very happy with the couple, will clean them out next week, get them MOT'ed and get the blue one, wich is the best one all free from rust although it isnt that much.
    Dont know what i will be doing with the other one, probably bolt it back together and sell it on so someone else can have one of these fine cars

  7. #7
    Member
    Join Date
    Jul 2009
    Location
    Essex, UK
    Posts
    37
    They look pretty good Eric, I look forward to seeing them get restored to their former glory.

    Neither appear to have much rust so they should turn out nice.

  8. #8
    Senior Member
    Join Date
    Nov 2008
    Location
    Strasburg, VA
    Posts
    508
    wow. the blue one looks awesome!! and it drove home.. that's great!

  9. #9
    Senior Member
    Join Date
    Dec 2009
    Location
    Netherlands
    Posts
    615
    Yes the blue one is teh best of the two as far as i can see now.
    Took out all of the interior of the blue one today, floor seems pretty solid, that is a good thing.
    Found some rustspots on the roof, underneath the chrome moulding on the side f the roof. looks fixable.

    Still happy with it

    Will have a closer look at the red one later this week, i think i will take best parts of both cars and make one for myself, and sell whats left over as a little project for someone else.

    can i change the dashboard between the 68 and 70 one? the 70 has a much better looking dashboard.

  10. #10
    Senior Member
    Join Date
    Dec 2009
    Location
    Netherlands
    Posts
    615
    Movies from the first driva after being stored for 5 years and me and my friend Jasper reanimated her for 10 minutes.

    http://www.youtube.com/watch?v=NnhryGQKjJk

    http://www.youtube.com/watch?v=F1Qh41EEbMU

Similar Threads

  1. N600 Color
    By Norcal510 in forum Honda Garage
    Replies: 11
    Last Post: 04-19-2011, 02:15 PM
  2. whats up from CA n600
    By cfio in forum Introduce Yourself
    Replies: 2
    Last Post: 03-31-2011, 06:50 AM
  3. $8400 for a n600, CA
    By RotaryRoadster in forum Ad / Auction Finds
    Replies: 0
    Last Post: 03-03-2011, 05:17 PM
  4. Could someone take some measurements for me on an a US N600
    By Team_Dandism in forum Honda Garage
    Replies: 4
    Last Post: 03-01-2011, 03:09 AM
  5. My n600's!
    By carrotsnax in forum Honda Garage
    Replies: 21
    Last Post: 08-07-2009, 10:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •