Poll: whitch wheels.

Be advised that this is a public poll: other users can see the choice(s) you selected.

Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: wheel fitment questions for a 76 mazda

  1. #1
    Member
    Join Date
    Mar 2010
    Location
    australia
    Posts
    70

    wheel fitment questions for a 76 mazda

    ok i own a 1976 mazda 121/rx5 im looking to get some new wheels but do not know the pcd.

    any help would be awsome.
    also are there any outher 76 121 owners out there?
    thay seem extremily rare in australia.

  2. #2
    Senior Member
    Join Date
    Jun 2009
    Location
    Brisbane, Australia
    Posts
    147
    I think 121/RX5 is 4x120......the Work Equip 01's and 03's only come in a 4x100 and 4x114.3, which sucks, because I'd love some 03's in 4x110 for my 808. The Volks I don't know, but usually these companies only do the more common stud pattern's...SSR do some unusual stuff sometimes.

  3. #3
    Senior Member
    Join Date
    Jan 2008
    Location
    Villeneuve, Qld, Australia
    Posts
    508
    Yes mate, you're right 4 x 120 only the Rx-5/121 and the 1500/1800 models had this. Trust me makes it hard to find wheels.

    I've got a 1977 121 Coupe deluxe auto trim.

    Also got 2 1977 121L Landau's and a 1978 121L Landau - love the quirky 121 range!

    Whats the plans for the 121?

  4. #4
    Member
    Join Date
    Aug 2008
    Location
    Moscow, Russia
    Posts
    39
    Quote Originally Posted by Beware
    I think 121/RX5 is 4x120......
    this is truth...

    Quote Originally Posted by Beware
    the Work Equip 01's and 03's only come in a 4x100 and 4x114.3, which sucks, because I'd love some 03's in 4x110 for my 808. The Volks I don't know, but usually these companies only do the more common stud pattern's...SSR do some unusual stuff sometimes.
    this is not truth... I do have a set of Work Equip 01 with PCD110, unfortunately 13" only... got them from Japan.

  5. #5
    Member
    Join Date
    Mar 2010
    Location
    australia
    Posts
    70
    hmmm wel that makes things a little harder.

    thanks heaps for the info though guys.

    plans well im haveing the engine rebuilt in the next couple weeks. then i need some new front seats. then i will have the rear seat re apolsterd. set of headers and full exhust. new springs and dampers and hopefully new wheels.



    [/img]



    some old pics. but its pritty mutch the same as the first pic.

  6. #6
    Senior Member
    Join Date
    Jun 2009
    Location
    Brisbane, Australia
    Posts
    147
    Quote Originally Posted by Kopasan

    Quote Originally Posted by Beware
    the Work Equip 01's and 03's only come in a 4x100 and 4x114.3, which sucks, because I'd love some 03's in 4x110 for my 808. The Volks I don't know, but usually these companies only do the more common stud pattern's...SSR do some unusual stuff sometimes.
    this is not truth... I do have a set of Work Equip 01 with PCD110, unfortunately 13" only... got them from Japan.
    hmmmmmm......are they originals, not the current 'new' series, because the new ones that you can still buy now aren't available in 4x110, I was making enquiries and its a no go.

  7. #7
    Administrator john's Avatar
    Join Date
    Oct 2007
    Location
    Arlington, TX, USA
    Posts
    5,529
    Quote Originally Posted by jimjams
    hmmm wel that makes things a little harder.

    thanks heaps for the info though guys.
    Why not some mid-80s RX7 bits to make it into 4x114.3? 8)

  8. #8
    Senior Member
    Join Date
    Jun 2009
    Location
    Melbourne, Australia
    Posts
    802
    Quote Originally Posted by datsunfreak
    Quote Originally Posted by jimjams
    hmmm wel that makes things a little harder.

    thanks heaps for the info though guys.
    Why not some mid-80s RX7 bits to make it into 4x114.3? 8)
    SIII RX-7 is the only RX-7 that was 4x114.3

  9. #9
    Administrator john's Avatar
    Join Date
    Oct 2007
    Location
    Arlington, TX, USA
    Posts
    5,529
    Quote Originally Posted by ewokracing
    SIII RX-7 is the only RX-7 that was 4x114.3
    Sorry, no idea what an SIII RX-7 is... :P

    But the last two years of the first generation RX-7 (SA22/FB) was available in 4x114.3. Is that what an SIII is?

  10. #10
    Administrator
    Join Date
    Jan 2007
    Posts
    3,108
    Quote Originally Posted by datsunfreak
    Quote Originally Posted by ewokracing
    SIII RX-7 is the only RX-7 that was 4x114.3
    Sorry, no idea what an SIII RX-7 is... :P

    But the last two years of the first generation RX-7 (SA22/FB) was available in 4x114.3. Is that what an SIII is?
    Yup, Series 3.

    As for the original question, style-wise the Work Equip 03s would look the best with your 121. First, you've got that bitchin' gold stripe and the 03s are gold. Second, the 01s and the TE37Vs are a bit too aggressive/sporty for a pimptastic luxo cruiser. I believe Hayashis came in 120 PCD and those would suit your car nicely.

Similar Threads

  1. ***Wheel/Tire Combo Questions(rota/toyo)***
    By whit in forum Toyota Garage
    Replies: 18
    Last Post: 05-27-2015, 03:40 AM
  2. 1969 Corona Wheel fitment
    By mozhated in forum Toyota Garage
    Replies: 9
    Last Post: 03-26-2012, 12:10 PM
  3. Australia-Where to find nostalgic rims (Wheel fitment fail)
    By Long in forum Resto Tips, Wheels & Other Goodies
    Replies: 46
    Last Post: 02-27-2012, 07:37 AM
  4. Mazda 616/Capella steering wheel hub size
    By BlueRocket in forum Mazda Garage
    Replies: 0
    Last Post: 07-17-2011, 03:30 PM
  5. Watanabe wheel fitment on an S30
    By DeLorean in forum Datsun/Nissan Garage
    Replies: 4
    Last Post: 03-24-2011, 09:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •