Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: 4age20v in a mx62??

  1. #1
    Junior Member
    Join Date
    Jul 2009
    Location
    Denver, Colorado
    Posts
    26

    4age20v in a mx62??

    Just wondering of that would work well or not. Any info is more then welcome thanks. [/code]

  2. #2
    Administrator
    Join Date
    Jan 2007
    Posts
    3,108
    Call me nutty but why would you want to put a 4cyl where a 6 should be?

  3. #3
    Administrator john's Avatar
    Join Date
    Oct 2007
    Location
    Arlington, TX, USA
    Posts
    5,529
    I'm going to say no. 8)

    Very heavy car for that engine. If you want something more modern, I'd be looking into a 5MGE or 7MGTE, or even a 1JZ/2JZ. :tu:

    If a 6 will fit, why put in a 4? :wink:

  4. #4
    Junior Member
    Join Date
    Jul 2009
    Location
    Denver, Colorado
    Posts
    26
    I knew about the 5mge, 7m, 1j and 2j I was just thinking of different options. I was even thinking about the kick ass 1uzfe. My 5me is still kickin hard so there won't be any swaps yet. I've just really liked the 20v haha I well as soon as I decide to do the swap I'll be letting you all know and will be asking more qestions haha.
    Thanks for the help

  5. #5
    Administrator john's Avatar
    Join Date
    Oct 2007
    Location
    Arlington, TX, USA
    Posts
    5,529
    Quote Originally Posted by 5280MX62
    I knew about the 5mge, 7m, 1j and 2j I was just thinking of different options. I was even thinking about the kick ass 1uzfe. My 5me is still kickin hard so there won't be any swaps yet.
    A 1UZ would be an awesome swap in that car. 8)

    I've just really liked the 20v haha I well as soon as I decide to do the swap I'll be letting you all know and will be asking more questions haha.
    Does that mean you're still set on the 4AGZE swap?

  6. #6
    Junior Member
    Join Date
    Jul 2009
    Location
    Denver, Colorado
    Posts
    26
    No I'm not set on anything haha

  7. #7
    Senior Member
    Join Date
    May 2008
    Location
    South Australia
    Posts
    251
    Quote Originally Posted by datsunfreak
    If a 6 will fit, why put in a 4? :wink:
    except in the case of the R30 skylines :wink:



    But back to the topic, I agree with datsunfreak, go for a 1UZ :wink:

  8. #8
    Senior Member
    Join Date
    Jan 2010
    Location
    Everett, WA
    Posts
    148
    A 4AG should do pretty well with some SENSIBLE mods. The car may be heavier than the other cars the motor is used in, but with todays advances in modifications, you should be able to get plenty of power to pull the weight. Compared to modern cars with 4bangers the Cressida is actually a lightweight smallish car. However, with this build, if you decide to pursue it, you'll want to focus more on torque than horspower. I say try something different, and if it doesn't work, at least you chose a cheaper motor

  9. #9
    Senior Member
    Join Date
    Jun 2009
    Location
    Lynnwood, Washington
    Posts
    349
    Not really an MX62, but it is a MX32 Cressida with a 4 cylinder engine.



    The owner said its an 18RG.

  10. #10
    Senior Member
    Join Date
    Feb 2009
    Location
    Northridge, CA
    Posts
    169
    Quote Originally Posted by bert
    A 4AG should do pretty well with some SENSIBLE mods. The car may be heavier than the other cars the motor is used in, but with todays advances in modifications, you should be able to get plenty of power to pull the weight. Compared to modern cars with 4bangers the Cressida is actually a lightweight smallish car. However, with this build, if you decide to pursue it, you'll want to focus more on torque than horspower. I say try something different, and if it doesn't work, at least you chose a cheaper motor
    No torque.

    Low RPM 2.8L 6-cyl to high rpm 1.6L 4-cyl...good idea :roll:

Similar Threads

  1. mx62 Big Booty
    By mitchbrock in forum Toyota Garage
    Replies: 3
    Last Post: 01-22-2015, 07:42 PM
  2. MX62
    By 5280MX62 in forum Toyota Garage
    Replies: 40
    Last Post: 07-18-2013, 03:09 PM
  3. S13 Suspension in MX62
    By mx62wagon in forum Toyota Garage
    Replies: 2
    Last Post: 05-20-2010, 05:14 PM
  4. new pictures of my MX62
    By 5280MX62 in forum Toyota Garage
    Replies: 11
    Last Post: 04-12-2010, 10:45 PM
  5. mx62 wagon
    By in forum Toyota Garage
    Replies: 13
    Last Post: 09-25-2009, 08:03 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •