Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: hayashi streets info please

  1. #1
    Member
    Join Date
    Nov 2011
    Location
    Avalon, NSW
    Posts
    65

    hayashi streets info please

    Hi Guys was wondering if anyone can tell me if the hayashi streets are available in 5 lug 110 pcd?
    Are there any suppliers in Australia done a bit of a search but havnt been able to find any info.
    Cheers Mick

  2. #2
    Senior Member
    Join Date
    Mar 2009
    Location
    Australia
    Posts
    627

    Re: hayashi streets info please

    Try Ottomotto in Nth Parramatta Mick for a used set, you might get lucky.

    Failing that Yahoo Auctions is your friend, you should be able to find a used set pretty easy. Don't pay too much for them, a polish, repaint, shipping can easily make it not worthwhile especially if you are having someone else clean and paint them. They will probably need new steel lug inserts, no biggy.

    I can't remember the exact figure I paid for my Wats, think they owe me 700 landed, most of the cost was in the shipping... generally speaking used wheels can be found pretty cheap. Upgarage is also worth a look, there are a couple of other places in Japan but can't remember them. Those are the main ones anyhow.

  3. #3
    Member
    Join Date
    Nov 2011
    Location
    Avalon, NSW
    Posts
    65

    Re: hayashi streets info please

    John the biggest problem is I've been looking for ages and can't find the right pcd the wagon is 5x110 pcd I don't know of any other Japanese car with this lug pattern and then off set is another thing. Any ideas of other Japanese cars that run this pattern

  4. #4
    Senior Member
    Join Date
    May 2010
    Location
    Brisbane, QLD, Australia
    Posts
    105

    Re: hayashi streets info please

    Quote Originally Posted by jdm10a
    John the biggest problem is I've been looking for ages and can't find the right pcd the wagon is 5x110 pcd I don't know of any other Japanese car with this lug pattern and then off set is another thing. Any ideas of other Japanese cars that run this pattern
    If you are looking for mags to suit Mazda 800/1000 5 stud it is the same as early Holden Torana and HK/T/G stud pattern.

    I had a set of wheels drilled to suit my 1000 wagon. As long as 13 inch or bigger diametre then you will clear the front wishbones.

  5. #5
    Member
    Join Date
    Nov 2011
    Location
    Avalon, NSW
    Posts
    65

    Re: hayashi streets info please

    Great info thanks for the heads up Jon.

  6. #6
    Member
    Join Date
    Feb 2010
    Location
    Geelong, Australia
    Posts
    85

    Re: hayashi streets info please

    you can buy Hayashi Streets new from Japan, Jesse Streeter, RupeWrecht, importmonster, otomoto etc can bring them in for you.
    http://www.hayashiracingusa.com/product ... ypest.html

    i think your chances of finding a used set in good sizes in 5x110 are about ?:1

    but anyway you'd need to request custom PCD and they're are expensive already. I hope you have deep pockets.

  7. #7
    Member
    Join Date
    Nov 2011
    Location
    Avalon, NSW
    Posts
    65

    Re: hayashi streets info please

    I did find the hayashi USA site I have sent a email requesting price on the custom pcd but no response, has anyone felt with them? Is there response time usually slow or has my email been lost in the cyber space

  8. #8
    Member
    Join Date
    Feb 2010
    Location
    Geelong, Australia
    Posts
    85

    Re: hayashi streets info please

    Contact Streeter or Rupewrecht, they can contact Hayashi Japan for you.

    or try calling the distributor for Hayashi in the states (5zigen)

  9. #9
    Member
    Join Date
    Feb 2009
    Location
    melbourne, Australia
    Posts
    33

    Re: hayashi streets info please

    Quote Originally Posted by jdm10a
    I did find the hayashi USA site I have sent a email requesting price on the custom pcd but no response, has anyone felt with them? Is there response time usually slow or has my email been lost in the cyber space
    I sent Hayashi USA an email a month or two ago, but I also never got a reply.
    I want to give them my money.. but no joy. That's how you run a business...

  10. #10
    Senior Member
    Join Date
    May 2010
    Location
    Brisbane, QLD, Australia
    Posts
    105

    Re: hayashi streets info please

    Here is a pic of my 1000 wagon fitted with 13 x 6 minlite style wheels. Same stud pattern as earlier 800.


Similar Threads

  1. FS (AZ): Hayashi Streets: 4x114.3 / 14x6 +15 / 14x6.5 +13
    By sdemo45 in forum Wheels Swap Meet
    Replies: 5
    Last Post: 02-01-2013, 02:00 AM
  2. 3 piece Hayashi Streets?
    By reintr0ducing in forum Resto Tips, Wheels & Other Goodies
    Replies: 17
    Last Post: 01-16-2013, 08:02 PM
  3. Hayashi Racing streets
    By Tommy Kaira in forum Wheels Swap Meet
    Replies: 0
    Last Post: 11-27-2010, 10:35 PM
  4. Hayashi Racing Wheels Info
    By 4boys in forum Resto Tips, Wheels & Other Goodies
    Replies: 12
    Last Post: 11-09-2010, 03:14 AM
  5. hayashi streets
    By a10 wagon in forum Resto Tips, Wheels & Other Goodies
    Replies: 2
    Last Post: 10-09-2010, 11:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •